Axial Lead Transient Voltage Suppressor
SA5V0-G Thru. SA191-G Series
Working Peak Reverse Voltage: 5.0 to 190 Volts
Peak Pulse Power: 500 Watts
RoHS Device
Features
-Glass passivated chip.
DO-15
0.033(0.84)
0.028(0.71)
-Low leakage.
1.000(25.40)
MIN.
-500W peak pulse power capability with a
10/1000μs waveform, repetitive rate (duty
cycle): 0.01%.
-Uni and Bidirectional unit.
-Excellent clamping capability.
0.300(7.63)
0.230(5.85)
-Very fast response time.
-RoHS compliant.
0.142(3.61)
0.102(2.60)
Mechanical data
1.000(25.40)
MIN.
-Case: Molded plastic DO-15
-Epoxy: UL 94V-0 rate flame retardant
Dimensions in inches and (millimeter)
-Terminals: Axial leads solderable per MIL-STD-
202, Method 208
-Polarity: Color band denotes positive end
(cathode)
-Mounting position: Any
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Value
Characteristics
Symbol
Units
Peak power dissipation with a 10/1000μS
waveform (Note 1)
PPP
500
W
Peak pulse current with a 10/1000μS
IPPM
PD
See Next Table
3.0
A
waveform (Note 1)
Power dissipation on infinite heatsink at
TL=75 OC
W
Peak forward surge current, 8.3ms single
half sine-wave uni-directional only (Note 2)
IFSM
70
A
Maximum instantaneous forward voltage
at 25A for uni-directional only (Note 3)
VF
3.5/5.0
V
Operating junction and storage temperature
range
OC
TJ,TSTG
-55 to +150
NTOES:
(1) Non-repetitive current pulse per fig.5 and derated above TA=25°C per fig. 1.
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
REV:A
Page 1
QW-BTV16
Comchip Technology CO., LTD.