SA_SERIES SPECIFICATION
Rev. A
500W AXIAL LEADED TRANSIENT VOLTAGE SUPPRESSORS, 5.0V – 220V
PRODUCT FEATURES
1. FLAMMABILITY CLASSIFICATION 94V-0
2. GLASS PASSIVATED CHIP JUNCTION
3. 500W PEAK PULSE POWER CAPABILITY WITH A 10/1000 µS
WAVEFORM, REPETITION RATE (DUTY CYCLE): 0.01%.
4. EXCELLENT CLAMPING CAPABILITY
5. FAST RESPONSE TIME FROM 0V TO VBR, TYPICALLY <1 pS
FOR UNI-DIRECTIONAL & <5nS FOR BI-DIRECTIONAL
6. POLARITY: INDICATED BY CATHODE BAND
7. MOLDED PLASTIC CASE DO-15
8. DIMENSIONS IN INCHES AND (MILLIMETERS)
9. LEADS: SOLDERABILITY PER MIL-STD-202 METHOD 208
10. WEIGHT: 0.40 GRAMS
11. RoHS COMPLIANT. ADD SUFFIX “-H” FOR HALOGEN
FREE PART. i.e. SA5.0A-H.
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS (TA =25°C UNLESS OTHERWISE NOTED)
UNIT
W
SYMBOL
PPPM
PARAMETER
CONDITIONS
500
SEE TABLE
3.0
PEAK POWER DISSIPATION
WITH A 10/1000 µS WAVEFORM, SEE NOTE 1 & FIG.1
WITH A 10/1000 µS WAVEFORM, SEE NOTE 1 & FIG.1
IPPM
A
PEAK PULSE CURRENT
PM(AV)
STEADY STATE POWER DISSIPATION
W
A
AT TL=75° C, LEAD LENGTH 0.375” (9.5mm)
8.3mS SINGLE HALF SINE-WAVE
(JEDEC METHOD), SEE NOTE 2
IFSM
70
PEAK FORWARD SURGE CURRENT
VF
TJ
3.5/5.0
V
MAXIMUM INSTANTANEOUS FORWARD
VOLTAGE
OPERATING JUNCTION TEMPERATURE
RANGE
AT 25A FOR UNI-DIRECTIONAL ONLY, SEE NOTE 3
OC
-55 TO +150
OC
STORAGE TEMPERATURE RANGE
-55 TO +150
TSTG
Non-repetitive current pulse, per fig. 3 and derated above TA=25°C per fig. 2
Note:1.
2. Measured
3. VF <3.5V max. for devices of VBR <200V, and VF <5.0V max. for devices of VBR >201V
on 8.3 ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 1 of 4
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989