Axial Lead Transient Voltage Suppressor
SA5V0-HF Thru. SA191-HF Series
Working Peak Reverse Voltage: 5.0 to 190 Volts
Peak Pulse Power: 500 Watts
RoHS Device
Halogen Free
DO-15
Features
- Glass passivated chip.
- Low leakage.
- 500W peak pulse power capability with a
10/1000μs waveform, repetitive rate (duty
cycle): 0.01%.
1.000(25.40) Min.
- Uni and Bidirectional unit.
0.300(7.63)
0.228(5.80)
- Excellent clamping capability.
- Very fast response time.
0.142(3.61) DIA.
0.102(2.60) DIA.
1.000(25.40) Min.
Mechanical data
- Case: Molded plastic DO-15
- Epoxy: UL 94V-0 rate flame retardant
0.035(0.90) DIA.
0.027(0.70) DIA.
- Terminals: Axial leads solderable per MIL-STD-202,
Method 208
Dimensions in inches and (millimeter)
- Polarity: Color band denotes cathode end
except bipolar
- Mounting position: Any
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Value
Characteristics
Symbol
Units
Peak power dissipation with a 10/1000μS
waveform (Note 1)
PPP
500
W
Peak pulse current with a 10/1000μS
IPPM
PD
See Next Table
3.0
A
waveform (Note 1)
Power dissipation on infinite heatsink at
TL=75°C
W
Peak forward surge current, 8.3ms single
half sine-wave uni-directional only (Note 2)
IFSM
70
A
Maximum instantaneous forward voltage
at 25A for uni-directional only (Note 3)
VF
3.5/5.0
V
Operating junction and storage temperature
range
TJ,TSTG
-55 to +150
°C
NTOES:
(1) Non-repetitive current pulse per fig.5 and derated above TA=25°C per fig. 1.
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
Company reserves the right to improve product design , functions and reliability without notice.
REV:B
Page 1
QW-JTV12
Comchip Technology CO., LTD.