S25FL127S
128 Mb (16 MB) FL-S Flash
SPI Multi-I/O, 3.0 V
Features
• CMOS 3.0 V core
• Density
- 128 Mb (16 MB)
• SPI with multi-I/O
- SPI clock polarity and phase modes 0 and 3
- Extended addressing: 24- or 32-bit address options
- Serial command set and footprint compatible with S25FL-A, S25FL-K, and S25FL-P SPI families
- Multi I/O command set and footprint compatible with S25FL-P SPI family
• READ commands
- Normal, Fast, Dual, Quad
- AutoBoot - power up or reset and execute a Normal or Quad read command automatically at a preselected
address
- Common flash interface (CFI) data for configuration information.
• Programming (0.8 MBps)
- 256- or 512-byte page programming buffer options
- Quad-input page programming (QPP) for slow clock systems
- Automatic ECC -internal hardware error correction code generation with single bit error correction
• Erase (0.5 MBps)
- Hybrid sector size option - physical set of sixteen 4-KB sectors at top or bottom of address space with all
remaining sectors of 64 KB
- Uniform sector option - always erase 256-KB blocks for software compatibility with higher density and future
devices.
• Cycling endurance
- 100,000 program-erase cycles per sector, minimum
• Data retention
- 20 year data retention, minimum
• Security features
- One-time programmable (OTP) array of 1024 bytes
- Block protection:
• Status Register bits to control protection against program or erase of a contiguous range of sectors.
• Hardware and software control options
- Advance sector protection (ASP)
• Individual sector protection controlled by boot code or password
• 65-nm MIRRORBIT™ technology with Eclipse architecture
• Supply voltage: 2.7 V to 3.6 V
• Temperature range:
- Industrial (–40°C to +85°C)
- Industrial Plus (–40°C to +105°C)
- Automotive AEC-Q100 grade 3 (–40°C to +85°C)
- Automotive AEC-Q100 grade 2 (–40°C to +105°C)
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1
001-98282 Rev. *K
2022-07-25