SaRonix
Voltage Controlled Crystal Oscillator 3.3 & 5V, HCMOS, SMD
S1318 / S1518 Series
Technical Data
Frequency Range:
32 MHz to 125 MHz
Frequency Stability:
50 ppm over all conditions: operating temperature, voltage change,
load change, calibration tolerance, aging, with V = 2.5V @ 5V,
C
V
= 1.65V @ 3.3V
C
Temperature Range:
Operating:
Storage:
0 to +70°C, -40 to +85°C
-55 to +125°C
Supply Voltage:
Recommended Operating:
+5 VDC 5% or 3.3V 10%
Supply Current:
32 to 70 MHz:
70+ to 125 MHz:
50mA max, 35mA max @ 3.3V
65mA max, 35mA max @ 3.3V
ACTUAL SIZE
Output Drive:
Symmetry:
45/55% @50% V
3.3V version 0 to +70°C only
DD,
40/60% @1.4V level, 3.3V version @50% V
Description
-40 to +85°C
DD,
1.5ns max @5V with TTL load only
Rise & Fall Times:
Logic 0:
4ns max 20 to 80% V
DD,
0.5V max, 20% V
2.5V min, 80% V
A voltage controlled, low current crystal
oscillator, providing precise rise and fall
times to drive high performance applica-
tions. The device is packaged in a 6-pin,
SMD,J-leadedpackage.Theplasticmold-
edsurfacemountablepackageisidealfor
today's automated assembly environ-
ments.
max @3.3V
max @3.3V
DD
DD
Logic 1:
Load:
50pF or 5TTL 32 to 50 MHz, 30pF up to 80 MHz @ 3.3V
30pF or 5TTL 50+ to 120 MHz, 95Ω AC up to 125 MHz @ 3.3V
20ps max
Period Jitter RMS:
Pull Characteristics:
Input Impedance:
Frequency Response (-3dB):
Pullability:
50KΩ min
50 kHz min
25, 50, 75 ppm APR* (See Part Numbering ꢀuide)
0.5 to 4.5V, 0.3 to 3.0V
Applications
Control Voltage:
Transfer Function:
Linearity:
Center Control Voltage:
Frequency Increases when Control Voltage Increases
10% max
2.5V @ 5V or 1.65V @ 3.3V
• For use in phase-locked loop (PLL)
clock and data recovery, frequency
translation, or frequency synthesis ap-
plicationsinvideo, videocompression,
telephony, and LAN/WAN data com-
munication environments.
Phase Noise:
-95 dBc/Hz @ 100 Hz
-110 dBc/Hz @ 1 kHz
-100 dBc/Hz @ 10 kHz
• High and wide frequency range from
32 MHz to 125 MHz
ˆ 3.3 or 5 Volt operation
Mechanical:
Shock:
Solderability:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
MIL-STD-202, Method 211, Conditions A & C
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
• Compact,plasticmoldedsurfacemount
package
• HCMOS and TTL compatible
• Tri-state output
MIL-STD-202, Method 210, Condition I or J
• Available on tape & reel; 24mm tape,
500pcs per reel
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Output Waveform
Solder Reflow Guide
HCMOS
Tr
Tf
Reflow 240°C max
Cooling
250
4°C/sec max
Preheat 183 10°C
1 LEVEL
80% VDD
50% VDD
20% VDD
0 LEVEL
200
150
4°C/sec max
Time
1 – 2 minutes
10 sec max
SYMMETRY
* APR = (VCXO Pull relative to specified Output Freq. @
nominal control voltage) – (VCXO Freq. Stability)
DS-171 REV C
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
SaRonix