S-8425 Series
BATTERY BACKUP SWITCHING IC
www.sii-ic.com
© SII Semiconductor Corporation, 2002-2015
Rev.3.1_01
The S-8425 Series is a CMOS IC designed for use in the switching circuits of primary and backup power
supplies on a single chip. It consists of three voltage regulators, two voltage detectors, a power supply switch
and its controller, as well as other functions.
In addition to the function for switching between the primary and backup power supply, the S-8425 Series can
provide microcontrollers with two types of voltage detection output signals corresponding to the power supply
voltage.
Moreover, adopting a special sequence for switch control enables the effective use of the backup power supply,
making this IC ideal for configuring a backup system.
Features
• Low power consumption
Normal operation: 15 μA max. (VIN = 6 V)
Backup:
2.1 μA max.
• Voltage regulator
Output voltage tolerance : 2%
Output voltage:
Independently selectable in 0.1 V steps in the range of 2.3 V to 5.4 V
• Two built-in voltage detectors (CS, RESET)
Detection voltage tolerance:
2%
Detection voltage: Selectable in 0.1 V steps in the range of 2.4 V to 5.3 V (CS voltage detector)
Selectable in 0.1 V steps in the range of 1.7 V to 3.4 V (RESET voltage detector)
• RESET release delay: 300 μs min.
• Switching circuit for primary power supply and backup power supply configurable on one chip
• Efficient use of backup power supply possible
• Special sequence
Backup voltage is not output when the primary power supply voltage does not reach the initial
voltage at which the switch unit operates.
• Lead-free, Sn 100%, halogen-free*1
*1. Refer to “ Product Name Structure” for details.
Packages
• 8-Pin TSSOP
• 8-Pin SON(B)
Applications
• Camcorders
• Digital cameras
• Memory cards
• SRAM backup equipment
1