®
RTQ2537
4A, 6.5V, Ultra Low Noise, Ultra Low Dropout Linear Regulator
General Description
Features
Input Voltage Range : 1.1V to 6.5V
The RTQ2537 is a high-current (4A), low-noise (6.8μVRMS),
high accuracy (1% over line, load, and temperature), low-
dropout linear regulator (LDO) capable of sourcing 4Awith
extremely low dropout (Max. 240mV). The device output
voltage is pin-selectable (up to 3.95V) using a PCB layout
without the need of external resistors, thus reducing overall
component count. Designers can achieve higher output
voltage with the use of external resistor divider. The device
supports single input supply voltage as low to 1.1V that
makes it easy to use.
Two Output Voltage Modes
0.8 V to 5.5V (Set by a Resistive Divider)
0.8 V to 3.95V (Set via PCB Layout, No External
Resistor Required)
Accurate Output Voltage Accuracy (1%) Over Line,
Load and Temperature
Ultra High PSRR : 40dB at 500kHz
Excellent Noise Immunity
6.8μVRMS at 0.8V Output
10μVRMS at 3.3V Output
Ultra Low Dropout Voltage : 240mV Max. at 4A
Enable Control
The low noise, high PSRR and high output current capability
makes the RTQ2537 ideal to power noise-sensitive devices
such as analog-to-digital converters (ADCs), digital-to-
analog converters (DACs), and RF components. With very
high accuracy, remote sensing, and soft-start capabilities
to reduce inrush current, the RTQ2537 is ideal for powering
digital loads such as FPGAs, DSPs, and ASICs.
Programmable Soft-Start Output
Stable with a 47μF or Larger Ceramic Output
Capacitor
Support Power-Good Indicator Function
RoHS Compliant and Halogen Free
The external enable control and power good indicator
function makes the control sequence easier. The output
noise immunity is enhanced by adding external bypass
capacitor on theNR/SS pin. The device is fully specified
over the temperature range of TJ = −40°C to 125°C and is
offered in a VQFN-20L 3.5x3.5 package.
Applications
Portable ElectronicDevices
Wireless Infrastructures : SerDes, FPGA, DSP
RF, IF Components : VCO, ADC, DAC, LVDS
Simplified Application Circuit
RTQ2537
V
VIN
IN
V
VOUT
OUT
C
IN
R1
R2
C
C
OUT
FF
Power Good
FB
R3
C
V
OUT
PGOOD
Enable
EN
NR/SS
NR/SS
GND
Copyright 2023 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DSQ2537-03 May 2023
www.richtek.com
1