®
RTQ2105-QA
36VIN, 3A, High Efficiency Synchronous Step-Down
Converter with Low Quiescent Current
General Description
Features
AEC-Q100 Grade 1 Qualified
Wide Input Voltage Range
4V to 36V
The RTQ2105 is a 3A, high-efficiency, current mode
synchronous step-down converter which is optimized for
automotive applications. The device operates with input
voltages from 3V to 36V and is protected from load dump
transients up to 42V, eases input surge protection design.
The device can program the output voltage between 0.8V
to VIN. The low quiescent current design with the integrated
low RDS(ON) power MOSFETs achieves high efficiency over
the wide load range. The peak current mode control with
simple external compensation allows the use of small
inductors and results in fast transient response and good
loop stability.
3V to 36V (Soft-start is finished)
Wide Output Voltage Range : 0.8V to VIN
Maximum Output Current : 3A
Peak Current Mode Control
Integrated 70mΩ Switch and 70mΩ Synchronous
Rectifier
Low Quiescent Current : 40μA
Fast 60ns Minimum Switch On-Time
Ultra-Short 65ns Minimum Switch Off-Time
Adjustable and Synchronizable Switching : 300kHz
to 2.2MHz
The wide switching frequency of 300kHz to 2200kHz allows
for efficiency and size optimization when selecting the
output filter components. The ultra-low minimum on-time
enable constant-frequency operation even at very high step-
down ratios. For switching noise sensitive applications, it
can be externally synchronized from 300kHz to 2200kHz.
The optional spread-spectrum frequency modulation further
helping systems designers with better EMC management.
Selectable PSM/FPWM at Light Load
Optional Spread-Spectrum Frequency Modulation
for Low EMI
Externally Adjustable Soft-Start
Power Good Indication
Enable Control
Adjustable Output Voltage with Cable Drop
Compensation
The RTQ2105 offers precise constant current and constant
voltage regulation. It is ideally suited for USB power delivery
or charging super-capacitors. For applications that use
long cable, the RTQ2105 offers cable drop compensation
as well to maintain accurate regulation at the end of the
long cable.
Constant Current (CC) and Constant Voltage (CV)
Regulation
0.8V 1.5% CV Reference Accuracy
Adjustable Current Limit
Adjacent Pin-Short Protection
Built-In UVLO, UVP, OTP
The RTQ2105 provides complete protection functions such
as input under voltage lockout, output under voltage
protection, over current protection, and thermal shutdown.
Cycle-by-cycle current limit provides protection against
shorted outputs and soft-start eliminates input current
surge during start-up. The RTQ2105 is available in WET-
WQFN-24SL 4x4 (W-Type) package.
Applications
Automotive Systems
Car Camera Module and Car Cockpit Systems
Connected Car Systems
Point of Load Regulator in Distributed Power Systems
Digital Set Top Boxes
Broadband Communications
USB Power Chargers
Copyright 2019 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DSQ2105-QA-01 May 2019
www.richtek.com
1