®
RTQ2131B-QA
1A, 36V, 2.1MHz Synchronous Step-Down Converter
General Description
Features
AEC-Q100 Grade 1 Qualified
The RTQ2131B is a 1A, high-efficiency, current mode
synchronous step-down converter which is optimized for
automotive applications. The device operates with input
voltages from 3V to 36V and is protected from load dump
transients up to 42V, eases input surge protection design.
The device can program the output voltage between 0.8V
to VIN. The peak current mode control with simple external
compensation allows the use of small inductors and
results in fast transient response and good loop stability.
Wide Input Voltage Range
4V to 36V
3V to 36V (Soft-start is finished)
Tight Switching Frequency Variation 2.1MHz 10%
Over Operating Ambient Temperature
Wide Output Voltage Range : 0.8V to VIN
5V Fixed Output Voltage ( see Ordering Information
for availability)
Maximum Output Current : 1A
Peak Current Mode Control
Integrated 200mΩ Switch and 160mΩ Synchronous
Rectifier
The RTQ2131B provides complete protection functions
such as input under voltage lockout, output under voltage
protection, over current protection, and thermal shutdown.
Cycle-by-cycle current limit provides protection against
shorted outputs and soft-start eliminates input current
surge during start-up. The RTQ2131B is available in
WDFN-10SL 3x3 (Exposed Pad) package.
Built-In Spread-Spectrum Frequency Modulation for
Low EMI
Power Good Indication
Enable Control
0.8V 1.5% Reference Voltage Accuracy
Adjacent Pin-Short Protection
Built-In UVLO, UVP, OTP
Applications
Automotive Systems
Car Camera Module and Car Cockpit Systems
Connected Car Systems
Point of Load Regulator in Distributed Power Systems
Digital Set Top Boxes
Ordering Information
(-
)
RTQ2131B
-QA
Broadband Communications
Grade
QA : AEC-Q100 Qualified and
Screened by High Temperature
Pin Configuration
Package Type
QW : WDFN-10SL 3x3 (W-Type)
(TOP VIEW)
Lead Plating System
G : Green (Halogen Free and Pb Free)
1
2
3
10
9
VIN
PGOOD
BOOT
SW
PGND
VCC
EN
FB/VS
COMP
AGND
8
7
6
4
5
Fixed Output Voltage
50 : 5V
11
Note :
Richtek products are :
WDFN-10SL 3x3
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Copyright 2018 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DSQ2131B-QA-01 August 2018
www.richtek.com
1