RT9819
Micro-Power Voltage Detectors
General Description
Features
z Internally Fixed Threshold 1.2V to 5V in 0.1V Step
The RT9819 is a micro-power voltage detector
supervising the power supply voltage level for
microprocessors (μP) or digital systems. It provides
internally fixed threshold levels with 0.1V per step ranging
from 1.2V to 5V, which covers most digital applications. It
features low supply current of 3μA. The RT9819 performs
supervisory function by sending out a reset signal
whenever the VDD voltage falls below a preset threshold
level. This reset signal will last the whole period before
VDD recovering. Once VDD recovered upcrossing the
threshold level, the reset signal will be released after a
certain delay time. RT9819 is provided in SC-70-3,
SC-82 and SOT-23-3 packages.
z High Accuracy 1.5%
z Low Supply Current 3μA
z No External Components Required
z Quick Reset within 20μs
z Built-in Recovery Delay Include 0ms, 55ms, 220ms,
450ms Options
z Low Functional Supply Voltage 0.9V
z CMOS Push-Pull Output
z Small SC-70-3, SC-82 and SOT-23-3 Packages
z RoHS Compliant and 100% Lead (Pb)-Free
Applications
z Computers
Ordering Information
z Controllers
-
RT9819
z Intelligent Instruments
z Critical μP and μC Power Monitoring
z Portable/Battery-Powered Equipment
Package Type
U3 : SC-70-3
V : SOT-23-3
VL : SOT-23-3 (L-Type)
Y : SC-82
YR : SC-82 (R-Type)
Marking Information
Operating Temperature Range
P : Pb Free with Commercial Standard
G : Green (Halogen Free with Commer-
cial Standard)
For marking information, contact our sales representative
directly or through a RichTek distributor located in your
area, otherwise visit our website for detail.
Threshold Voltage
12 : 1.2V
13 : 1.3V
:
Typical Application Circuit
49 : 4.9V
50 : 5.0V
RT9819
VDD
GND
VDD
Reset Active Timeout Period
A = 0ms (RESET)
up
RESET/
RESET
B = 55ms (RESET)
C = 220ms (RESET)
D = 450ms (RESET)
E = 0ms (RESET)
RESET/
RESET
F = 55ms (RESET)
G = 220ms (RESET)
H = 450ms (RESET)
Note :
RichTek Pb-free and Green products are :
`RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
`Suitable for use in SnPb or Pb-free soldering processes.
`100%matte tin (Sn) plating.
DS9819-05 August 2007
www.richtek.com
1