RT9718
Over Voltage Protection IC
General Description
Features
Fully Integrated Protection Function
The RT9718 is an integrated circuit optimized to protect
low voltage system from abnormal high input voltage (up
to 30V). The IC monitors the input voltage, battery voltage
and the charging current to make sure all three parameters
are operated in normal range. When the input voltage
exceeds a certain OVP threshold voltage level, the IC will
turn off the power MOSFET within 1μs to remove the power
before any damage occurs. The RT9718 also can provide
a voltage output without the existence of battery.
Programmable OCP
Input OVP
Battery OVP
Withstand High Input Voltage Up to 30V
Over Voltage Turn Off Time Less Than 1us
High Accuracy Protection Thresholds
Over Temperature Protection
High Immunity of False Triggering Under Transients
Warning Indication Output
The current in the power MOSFET is also limited to prevent
charging the battery with an excessive current. The current
limit can be programmed by an external resistor between
ILIM and GND. The OCP function also has a 4-bit binary
counter that accumulates during an OCP event. When the
total count reaches consecutive 16 times, the power
MOSFET is turned off permanently unless the input power
is recycled.
Enable Input
Thermal Enhanced WDFN Package
RoHS Compliant and Halogen Free
Applications
Cellular Phones
Digital Cameras
PDAs and Smart Phones
Portable Instruments
The IC also monitors the battery voltage, Once the battery
voltage exceeds 4.35V and last for more then 180us
blinking time, the RT9718 will turn off the MOSFET. The
internal logic control will turn off the power MOSFET
permanently when the battery over-voltage event occurs
for consecutive 16 times.
Pin Configurations
(TOP VIEW)
1
2
3
4
8
7
6
5
VIN
GND
NC
VOUT
ILIM
VB
9
EN
WRN
Ordering Information
RT9718
WDFN-8L 2x2
Package Type
QW : WDFN-8L 2x2 (W-Type)
Marking Information
Lead Plating System
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
G : Green (Halogen Free and Pb Free)
Z : ECO (Ecological Element with
Halogen Free and Pb free)
OVP
A : 6.80V
B : 5.85V
C : 6.25V
D : 7.20V
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
DS9718-03 January 2019
www.richtek.com
1