®
RT8510
43V 4-CH LED Driver
General Description
Features
Wide Input Voltage : 4.2V to 24V
The RT8510 is a high efficiency driver for white LEDs. It is
designed for LCDpanels that employ an array of LEDs as
the lighting source. An integrated switch current mode
boost controller drives four strings in parallel and supports
up to 12 pieces of LED per string. The internal current
sinks support a maximum of 2% current mismatching
for excellent brightness uniformity in each string of LED.
To provide enough headroom for current sink operation
the boost controller monitors the minimum voltage of
feedback pins and regulates an optimized output voltage
for power efficiency.
High Output Voltage : Up to 43V
Adjustable Channel Current : 10mA to 40mA
Channel Current Accuracy : 3%
Channel Current Matching : 2%
PWM Dimming Frequency : 120Hz to 30kHz
Adjustable Switching Frequency : 500kHz to 2MHz
Built-In Soft-Start
Disconnects LED in Shutdown
Open Current Sink Detection
Adjustable Over Voltage Protection
Over Temperature Protection
The RT8510 has a wide input voltage range from 4.2V to
24V and provide an adjustable 10mAto 40mALEDcurrent.
The internal 200mΩ, 43V power switch with current-mode
control provides cycle-by-cycle over current protection.
The RT8510 also integrates PWM dimming function for
accurate LED current control. The input PWM dimming
frequency can operate from 120Hz to 30kHz without
inducing any inrush current through the LED or inductor.
The switching frequency of the RT8510 is adjustable from
500kHz to 2MHz, allowing the user flexibility between
efficiency and component size.
Current Limit Protection
Thin 16-Lead WQFN Package
RoHS Compliant and Halogen Free
Applications
UMPC andNotebook Computer Backlight
GPS, Portable DVD Backlight
Pin Configuration
(TOP VIEW)
The RT8510 is available in a WQFN-16L 3x3 package.
16 15 14 13
1
2
3
4
12
11
10
9
AGND
COMP
ISET
RT
OVP
PGND
PGND
LX
Ordering Information
RT8510
GND
17
Package Type
QW : WQFN-16L 3x3 (W-Type)
5
6
7
8
Lead Plating System
G : Green (Halogen Free and Pb Free)
Z : ECO (Ecological Element with
Halogen Free and Pb free)
Note :
WQFN-16L 3x3
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Copyright 2017 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS8510-04 March 2017
www.richtek.com
1