®
RT8092
3MHz 4A High Efficiency Step-Down Converter with I2C
Interface
General Description
select VOUT voltage level, peak current limit level, PWM
control mode, and so on. Other features include soft-start,
auto discharge, lower internal reference voltage, over-
temperature, and over-current protection.
The RT8092 is a Peak-Current Mode Pulse-Width-
Modulated (PWM) step-down DC/DC converter with I2C
control interface. Capable of delivering 4Acontinuing output
current over a wide input voltage range from 2.5V to 5.5V,
the RT8092 is ideally suited for portable electronic devices
that are powered from 1-cell Li-ion battery or from other
power sources within the range such as cellular phones,
PDAs and handy-terminals.
Features
2.5V to 5.5V Input Range
Low Operation Quiescent Current
Normal Mode IQ < 60μA
Low Power Mode IQ < 15μA
Output range From 0.3V to 5.5V
Bank 0 : 0.3V to 0.7V
Internal synchronous rectifier with low RDS(ON) dramatically
reduces conduction loss at PWM mode. No external
Schottky barrier diode is required in practical application.
The RT8092 enters low-dropout mode when normal PWM
cannot provide regulated output voltage by continuously
turning on the upper P-MOSFET. The RT8092 enters shut-
down mode and consumes less than 5μA when the EN
pin is pulled low. The switching ripple is easily smoothed-
out by small package filtering elements due to a fixed
operation frequency of 3MHz. This along with small
WL-CSP-15B 1.2x2 (BSC) and WQFN-14L 3.5x3.5
packages provides small PCB area applications.
Bank 1 : 0.6V to 1.4V
Bank 2 : 1.2V to 2.8V
Bank 3 : 2.4V to 5.5V
The Default Value is 2.8V (VSEL = High) and 1V
(VSEL = Low)
4A Continuing Output Current
Support DVS in the Same Bank
VOUT Adjusting Range (max, min) is Settable
High Efficiency
To increase battery life time, the RT8092 provides low
power mode with IQ < 15μA in standby and light-load
applications. The RT8092 also includesDynamic Voltage
Scaling (DVS) for system low power applications.
90% at 5V 2.8V with 1.5A Load
3MHz Fixed-Frequency PWM Operation
Auto-PSM/PWM or Force-PWM Selectable
Support Remote Ground Sensing for Accurate
Output Voltage
The I2C interface let the RT8092 controllable flexibly to
Simplified Application Circuit
RT8092
PVIN
Input Power
LX
Output
Load
AVDD
GNDR
VOUT
PGND
Enable
EN
SCL
SDA
VSEL
2
I C Control
AGND
VOUT Select
Copyright 2017 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS8092-03 January 2017
www.richtek.com
1