®
RT7248
2A, 18V, 340kHz Synchronous Step-Down Converter
General Description
Features
ꢀ
1.5% High Accuracy Feedback Voltage
The RT7248 is a high efficiency, monolithic synchronous
step-downDC/DC converter that can deliver up to 2Aoutput
current from a 4.5V to 18V input supply. The RT7248's
current mode architecture and external compensation
allow the transient response to be optimized over a wide
input range and loads. Cycle-by-cycle current limit
provides protection against shorted outputs and soft-start
eliminates input current surge during start up. The RT7248
also provides under voltage protection and thermal
shutdown protection. The low current (< 3μA) shutdown
mode provides output disconnection, enabling easy power
management in battery-powered systems. The RT7248
is available in SOP-8 (Exposed Pad) package.
ꢀ Input Voltage Range : 4.5V to 18V
ꢀ 2A Output Current
ꢀ Integrated N-MOSFETs
ꢀ Current Mode Control
ꢀ 340kHz Fixed Frequency Operation
ꢀ Output Adjustable Voltage Range : 0.923V to 15V
ꢀ Efficiency Up to 95%
ꢀ Programmable Soft-Start
ꢀ Stable with Low ESR Ceramic Output Capacitors
ꢀ Cycle-by Cycle Over Current Protection
ꢀ Input Under Voltage Lockout
ꢀ Output Under Voltage Protection
ꢀ Thermal Shutdown Protection
ꢀ RoHS Compliant and Halogen Free
Marking Information
RT7248xGSP : Product Number
Applications
RT7248x
x : H or N
GSPYMDNN
ꢀ Wireless AP/Router
YMDNN : Date Code
ꢀ Set-Top-Box
ꢀ Industrial and Commercial Low Power Systems
ꢀ LCDMonitors and TVs
ꢀ Green Electronics/Appliances
ꢀ Point of Load Regulation of High-PerformanceDSPs
Simplified Application Circuit
V
IN
VIN
BOOT
RT7248
C
IN
C
BOOT
L
C
SW
V
OUT
Chip Enable
EN
SS
R1
R2
C
OUT
FB
C
C
C
R
SS
COMP
GND
C
P
Copyright 2012 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS7248-01 September 2012
www.richtek.com
1