RS245
Octal Bus Transceiver with 3-State Outputs
1 FEATURES
3 DESCRIPTIONS
The RS245 is designed for asynchronous communication
•
Power-Supply Range:1.65V to 5.5V
VCC Isolation: If VCC is at GND, Both Ports
are in the High-Impedance State
IOFF: Supports Partial-Power-Down Mode
Operation
between two data buses. The logic levels of the direction-
•
̅̅̅̅
control (DIR) input and the output-enable ( OE ) input
activate either the B-port outputs or the A-port outputs or
place both output ports into the high-impedance mode. The
device transmits data from the A bus to the B bus when the
B-port outputs are activated, and from the B bus to the A
bus when the A-port outputs are activated. The input
circuitry on both A and B ports is always active and must
have a logic HIGH or LOW level applied to prevent excess
•
•
Extended Temperature: -40°C to +125°C
2 APPLICATIONS
•
•
•
•
Handset
ICC and ICCZ
.
Smartphone
Tablet
This device is fully specified for partial-power-down
applications using IOFF. The IOFF circuitry disables the
outputs, preventing damaging current backflow through the
device when it is powered down.
Desktop PC
The VCC isolation feature ensures that if either VCC input is
at GND, all outputs are in the high-impedance state.
To ensure the high-impedance state during power up or
̅̅̅̅
power down, OE should be tied to VCC through a pullup
resistor, the minimum value of the resistor is determined by
the current-sinking capability of the driver.
It operates over an ambient temperature range of -40°C to
+125°C.
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TSSOP-20(20)
6.50mm×4.40mm
RS245
SOIC-20
(SOP20)(20)
12.80mm×7.50mm
(1) For all available packages, see the orderable addendum at the end of
the data sheet.
REV A.3
1 / 16
www.run-ic.com