R1180x SERIES
150mA LDO REGULATOR
OUTLINE
NO.EA-105-111027
The R1180x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, and low ON-resistance. Each of these ICs consists of a voltage reference unit, an error amplifier,
resistor-net for voltage setting, a current limit circuit which prevents the destruction by excess current, and so on.
The output voltage of these ICs is fixed with high accuracy. B version has a chip enable pin, therefore ultra-low
consumption current standby mode can be realized with the pin.
Since the packages for these ICs are SOT-23-5 (R1180N Series), SC-82AB (R1180Q Series), and SON1612-6
(R1180D Series), therefore high density mounting of the ICs on boards is possible.
FEATURES
• Supply Current......................................................... Typ. 1μA
(Except the current through CE pull-down circuit)
• Standby Mode.......................................................... Typ. 0.1μA
• Dropout Voltage ....................................................... Typ. 0.25V (IOUT=150mA 3.0V Output type)
• Temperature-Drift Coefficient of Output Voltage...... Typ. ±100ppm/°C
• Line Regulation........................................................ Typ. 0.05%/V
• Output Voltage Accuracy.......................................... ±2.0%
• Packages ................................................................ SON1612-6, SC-82AB, SOT-23-5
• Output Voltage Range.............................................. 1.2V to 3.6V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
• Built-in Fold Back Protection Circuit ........................ Typ. 40mA (Current at short mode)
• Ceramic capacitors are recommended to be used with this IC .....0.1μF
APPLICATIONS
• Stable voltage reference.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
1