End of Life Jan-2021
RNX
Vishay Dale
www.vishay.com
Metal Oxide Resistors, Special Purpose, High Voltage
FEATURES
• Low TCR: 200 ppm/°C standard;
100 ppm/°C; ꢀ0 ppm/°C available
Available
• Tolerance:
1 % standard to 1 GΩ; ꢀ %
above 1 GΩ; 0.ꢀ % available in ꢀ0 ppm/°C
only. Special tolerance and / or temperature
coefficient matching available
• High voltage (up to 8 kV)
Available
• For oil bath or open air operation
• Matched sets available
• Special testing available upon request
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
MAXIMUM
WORKING
VOLTAGE (2)
V
RESISTANCE
RANGE (3)
Ω
TEMPERATURE
COEFFICIENT
ppꢁm/C
GLOBAL
MODEL
HISTORICAL
MODEL
TOLERANCE
ꢀ
(1)
(1)
(1)
P25 /C
P70 /C
P125 /C
W
W
W
1M to 22M
1K to 100M
100 to 100K
1M to ꢀ0M
1K to 100M
1K to 1G
100 to 100K
1M to 100M
1K to 2ꢀ0M
1K to 2G
100 to 100K
1M to 100M
1K to ꢀ00M
1K to 2G
100 to 100K
1M to 100M
1K to ꢀ00M
1K to 2G
100 to 1M
1K to ꢀ00M
1K to 2G
100 to 1M
1K to ꢀ00M
1K to 2G
100 to 1M
1K to ꢀ00M
1K to 2G
0.ꢀ, 1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
0.ꢀ, 1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
0.ꢀ, 1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
0.ꢀ, 1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
0.ꢀ, 1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
1, 2, ꢀ, 10
ꢀ0
RNX02ꢀ
RNX038
RNX-1/4
RNX-3/8
0.ꢀ
1.0
0.36
0.72
0.2ꢀ
0.ꢀ
7ꢀ0
100, 200
Non-inductive (4)
ꢀ0
100
200
1.ꢀK
Non-inductive (4)
ꢀ0
100
200
RNX0ꢀ0
RNX07ꢀ
RNX100
RNX-1/2
RNX-3/4
RNX-1
1.2
2.0
2.ꢀ
0.86
1.44
1.8
0.6
1.0
2K
3K
4K
Non-inductive (4)
ꢀ0
100
200
Non-inductive (4)
ꢀ0
100
200
1.2ꢀ
Non-inductive (4)
100
RNX12ꢀ
RNX1ꢀ0
RNX200
RNX-1-1/4
RNX-1-1/2
RNX-2
3.0
4.0
ꢀ.0
2.16
2.88
3.6
1.ꢀ
2.0
2.ꢀ
ꢀK
6K
8K
200
Non-inductive (4)
100
200
Non-inductive (4)
100
200
100 to 1M
Non-inductive (4)
Notes
•
•
•
All resistance values are calibrated at 100 VDC. Calibration at other voltages available
Part marking: Print marked - DALE, model, value, tolerance, TCR, date code (model and date omitted on RNX-1/4)
Special modifications:
- Special preconditioning (power aging, temperature cycling etc.) to customer specifications
- Non-helixed resistors can be supplied for critical high frequency applications (non-inductive)
Increase wattage by 2ꢀ % for 0.032" (0.813 mm) diameter leads
Continuous working voltage shall be P x R or maximum working voltage, whichever is less
For resistance values above and below those listed please contact us
Non-inductive 200 ppm/°C TCR only
(1)
(2)
(3)
(4)
Revision: 11-Jan-2021
Document Number: 31032
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000