APPLICABLE STANDARD
-25 C TO
+85 C
-10
C TO
+60 C
OPERATING
STORAGE TEMPERATURE
RANGE
RATING
TEMPERATURE RANGE
VOLTAGE
AC 350 V , DC 490 V
5 A
CURRENT
APPLICABLE CABLE
φ8 ± 0.2
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
MARKING
ELECTRIC CHARACTERISTICS
4
m MAX.
X
X
X
X
X
X
CONTACT RESISTANCE
CONTACT SHALL BE MEASURED AT DC
1
A
1000 M MIN.
INSULATION RESISTANCE
500
V DC.
VOLTAGE PROOF
1000
V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
0.003
CONTACT INSERTION AND
INSERTION AND WITHDRAWAL FORCES :
BY STEEL GAUGE.
φ0.991
X
X
-
-
0
WITHDRAWAL FORCES
0.2 N MIN.
INSERTION AND WITHDRAWAL FORCES
LOCKING DEVICE WITH UNLOCK
CONTACT RESISTANCE:
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURED BY APPLICABLE CONNECTOR.
:
30 N MAX.
8
m MAX.
MECHANICAL OPERATION
2000 TIMES INSERTIONS AND EXTRACTIONS.
X
X
-
-
①NO ELECTRICAL DISCONTINUITY OF 10 s.
VIBRATION
SHOCK
FREQUENCY : 10 → 55 → 10(Hz) (1CYC, 5min),
SINGLE AMPLITUDE 0.75 mm, AT 10CYC, FOR 3 DIRECTIONS. ②NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
IN OPPOSITE DIRECTIONS OF EACH 3 DEMENSION AXIS FOR 3
TIMES AT 490 m/s2 DURATIONS OF PULSE 11 ms.
X
X
-
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 ℃, 90 TO 95 %, 96 h.
① INSULATION RESISTANCE: - MΩ MIN
(AT HIGH HUMIDITY).
(STEADY STATE)
② INSULATION RESISTANCE: 100 MΩ MIN (AT DRY).
③ NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
① INSULATION RESISTANCE: 100 MΩ MIN.
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
NO HEAVY CORROSION RUIN THE FUNCTION.
RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ R/T(1) → +85 → R/T ℃
TIME 30 → 2~3 → 30 → 2~3 min UNDER 5 CYCLES.
X
-
EXPOSED IN 5 SALT WATER SPRAY FOR 48 h.
EXPOSED AT + 85 ℃ , 96 h.
CORROSION SALT MIST
DRY HEAT
X
X
X
X
-
-
-
-
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
EXPOSED AT – 55 ℃ , 96 h.
COLD
RESISTANCE TO SOLDERING
HEAT
SOLDERED AT SOLDERING IRON BIT TEMPERATURE +380±10℃ NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS
FOR 3 s. OF THE TERMINALS.
SOLDERED AT SOLDERING IRON BIT TEMPERATURE +350±10℃ WETTING ON SOLDER SURFACE.
SOLDERABILITY
X
-
FOR 3 s.
NO SOLDER CLUSTER.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HY.KOBAYASHI
HY.KOBAYASHI
KN.IKEHARA
15.09.10
15.09.10
15.09.10
15.09.10
NOTE
(1) R/T : ROOM TEMPERATURE.
Unless otherwise specified, refer to JIS C 5402. (IEC 60512)
KN.IKEHARA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-112329-81-00
RM12BPE-6S(81)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL109-0427-0-81
FORM HD0011-2-1