Metal Oxide Varistors - RL1206A Series
Electrical Rating
No
ltem
Test Condition / Description
Requirement
-
Operation
Range
1
1. -40°C ~ 85°C
Leakage
current
Applied voltage : specified working voltage
Frquency & OSC level : 1MHz, 1.0Vrms
2
3
4
5
6
7
8
Satisfaction to the specification, under 1uA
Capacitance Satisfaction to the specification, under 1pF
More than 90% of the terminal electrode
Solderability
1. Type of solder : H63A
2. Soldering Temp & Time : 230+/-5°C, 5+/-1 sec
shall be covered with new solder.
1. No Serious mechanical damage
1. Type of solder : H63A
2. Temp & Time : max 260+/-5°C, min 10sec
* Refer to the soldering profile of page 6
Reflow
soldering
2. More than 50% of the terminal electrode
shall be covered with new solder
3. Leakage Currrent :≤ 10uA
Humidity
Load Test
1. No Serious mechanical damage
2. Leakage Currrent :≤ 10uA
Test Temp. & Relative Humidity & Time : 85+/- 5°C,
85 +/- 5% RH, Vw Applied, 500 +/- 12hrs
Thermal
Shock
1. No Serious mechanical damage
2. Leakage Currrent :≤ 10uA
1. Step 1 : -40 +/- 5°C, Step 2 : 85 +/- 5°C
2. Cycle : 30min ± 3min, each 5 cycles
High Temp.
Test
1. No Serious mechanical damage
2. Leakage Currrent :≤ 10uA
Temp. & time : 85+/-5°C , 1000 +/- 24hrs
1. No Serious mechanical damage
under condition of
1005 : min 0.5kgf, 1608 : min 1.0kgf
Adhesive
strength
W [kgf] min.
9
1. Contact discharge
* Voltage :+/-8kV(Level 4)
* Number : 10 times in 10sec
1. No mechanical damage after test
2. Leakage Current :≤ 10uA
* ESD gun (IEC61000-4-2 standard)
* C=150pF R=330Ω
10
ESD
2. Air discharge
* Voltage :+/-15kV(Level 4)
* Number : 10 times in 10sec
Specifications are subject to change without notice.
Circuit Protection
System
Page:3
Please refer to http://www.ruilon.com for current information.