SMPS Capacitors (RH Style)
RH - Surface Mount ‘J’ Lead Range
The RH range uses high volumetric efficient X7R capacitors in a “J” style lead frame.
The range of components are uncoated and are suitable for input or output filter capacitors in
high frequency DC-DC convertor, automotive, telecom, industrial and military applications.
When large ceramic capacitors are used in applications they can easily be affected by stresses
caused by temperature variations, thermal shock, mechanical vibrations and PCB bend
movement. The RH range is designed with a “J” type lead frame which greatly reduces all of
these thermo mechanical stresses experienced by large capacitors. The RH range allows the
capacitors to be doubled stacked so a higher volumetric efficiency can be achieved by the
customer and this saves PCB space.
FEATURES
• RH 21/22 are AEC-Q200 compliant.
• RH range has low ESR/ESL capability
• PCB space saving using double stacked MLCCs
• Enhanced thermo mechanical stress resistance
Note: AVX does not recommend or advise the use of adhesives to secure the RH components to the PCB.
Typical ESR (mΩ) 3 μF, 100V X7R
ELECTRICAL SPECIFICATIONS
Temperature Coefficient CECC 30 000, (4.24.1)
ESR @ 100KHz
ESR @ 500KHz
ESR @ 1MHz
17
12
14
X7R: C Temperature Characteristic - 15ꢀ, -55ꢁC to ꢂ125ꢁC
Capacitance Test
Measured at 1 VRMS max at 1KHz
DIMENSIONS
millimeters (inches)
No. of leads
Dissipation Factor 25°C
2.5ꢀ max at 1KHz, 1 VRMS max
Style
L max
W max
H max
S
h
per side
6.20 0.50
1.50 0.30
2
RH21 7.20 (0.283)
RH22 7.20 (0.283)
RH31 7.62 (0.300)
RH32 7.62 (0.300)
RH41 9.20 (0.362)
RH42 9.20 (0.362)
RH51 10.7 (0.421)
RH52 10.7 (0.421)
RH61 14.9 (0.586)
RH62 14.9 (0.586)
5.40 (0.213)
5.40 (0.213)
7.00 (0.270)
7.00 (0.270)
8.70 (0.342)
8.70 (0.342)
10.7 (0.421)
10.7 (0.421)
13.6 (0.535)
13.6 (0.535)
4.60 (0.181)
7.50 (0.295)
5.08 (0.200)
7.80 (0.307)
4.90 (0.192)
8.20 (0.323)
4.90 (0.192)
8.20 (0.323)
4.90 (0.192)
8.20 (0.323)
Insulation Resistance 25°C
100K megohms or 1000 megohms-µF, whichever is less
(0.244 0.020) (0.059 0.012)
6.20 0.50
(0.244 0.020) (0.059 0.012)
6.20 0.50 1.78 0.25
(0.244 0.020) (0.070 0.010)
6.20 0.50 1.78 0.25
(0.244 0.020) (0.070 0.010)
8.20 0.50 1.60 0.10
(0.323 0.020) (0.062 0.004)
8.20 0.50 1.60 0.10
(0.323 0.020) (0.062 0.004)
10.16 0.50 1.60 0.10
(0.400 0.020) (0.062 0.004)
10.16 0.50 1.60 0.10
(0.400 0.020) (0.062 0.004)
14.0 0.50 1.60 0.10
(0.551 0.020) (0.062 0.004)
14.0 0.50 1.60 0.10
1.50 0.30
2
3
3
3
3
4
4
5
5
Dielectric Withstanding Voltage 25°C (Flash Test)
250ꢀ rated voltage for 5 seconds with 50 mA max
charging current. (500 Volt units @ 150ꢀ rated voltage)
Life Test (1000 hrs) CECC 30 000 (4.23)
200ꢀ rated voltage at ꢂ125ꢁC.
(500 Volt units @ 120ꢀ rated voltage)
Thermal Shock IEC 68.2.14
-55ꢁC to ꢂ125ꢁC, 5 cycles
Resistance to Solder Heat IEC 68.2.20
(0.551 0.020) (0.062 0.004)
DIMENSIONS millimeters (inches)
0ꢀ6 0ꢀ1
ꢁ0ꢀ024 0ꢀ004ꢂ
L Maxꢀ
W Maxꢀ
M1
M1 = M2 0ꢀ. ꢁ0ꢀ020ꢂ
M2
H Maxꢀ
h
1ꢀ4
ꢁ0ꢀ0..ꢂ
Typꢀ
0ꢀ2.
ꢁ0ꢀ010ꢂ
Typꢀ
2ꢀ.4 0ꢀ0.
ꢁ0ꢀ100 0ꢀ002ꢂ
Non-Accumꢀ
1ꢀ6. 0ꢀ1.
ꢁ0ꢀ06. 0ꢀ006ꢂ
Bend Radius
90º .º
Performance of SMPS capacitors can be simulated by downloading SpiCalci software program -
http://www.avx.com/download/software/SpiCalci-AVX.zip
Custom values, ratings and configurations are also available.
072716
65