Precision Micropower, Low Dropout,
Voltage References
a
REF19x Series
PIN CONFIGURATIONS
FEATURES
Initial Accuracy: ؎2 mV max
Temperature Coefficient: 5 ppm/°C max
Low Supply Current: 45 A max
Sleep Mode: 15 A max
8-Lead Narrow-Body SO and TSSOP
(S Suffix and RU Suffix)
NC
1
2
3
4
TP
8
7
6
5
Low Dropout Voltage
REF19x
SERIES
Load Regulation: 4 ppm/mA
Line Regulation: 4 ppm/V
High Output Current: 30 mA
Short Circuit Protection
NC
V
S
OUTPUT
TP
SLEEP
GND
TOP VIEW
(Not to Scale)
APPLICATIONS
Portable Instrumentation
A-to-D and D-to-A Converters
Smart Sensors
Solar Powered Applications
Loop Current Powered Instrumentations
8-Lead Epoxy DIP (P Suffix)
NC
1
2
TP
8
7
6
5
REF19x
SERIES
NC
V
S
TOP VIEW
(Not to Scale)
OUTPUT
TP
3
4
SLEEP
GND
GENERAL DESCRIPTION
REF19x series precision bandgap voltage references use a pat-
ented temperature drift curvature correction circuit and laser
trimming of highly stable thin film resistors to achieve a very low
temperature coefficient and a high initial accuracy.
NC = NO CONNECT
TP PINS ARE FACTORY TEST POINTS
NO USER CONNECTION
The REF19x series are micropower, Low Dropout Voltage
(LDV) devices providing a stable output voltage from supplies
as low as 100 mV above the output voltage and consuming less
than 45 µA of supply current. In sleep mode, which is enabled
by applying a low TTL or CMOS level to the sleep pin, the
output is turned off and supply current is further reduced to less
than 15 µA.
Table I
Part Number
Nominal Output Voltage (V)
REF191
REF192
REF193
REF194
REF195
REF196
REF198
2.048
2.50
3.00
4.50
5.00
3.30
4.096
The REF19x series references are specified over the extended
industrial temperature range (–40°C to +85°C) with typical
performance specifications over –40°C to +125°C for applica-
tions such as automotive.
All electrical grades are available in 8-Lead SOIC; the PDIP and
TSSOP are only available in the lowest electrical grade. Prod-
ucts are also available in die form.
ORDERING GUIDE
Temperature
Range
Package
Description
Package
Option1
Model
Test Pins (TP)
The test pins, Pin 1 and Pin 5, are reserved for in-package
zener-zap. To achieve the highest level of accuracy at the out-
put, the zener-zapping technique is used to trim the output
voltage. Since each unit may require a different amount of ad-
justment, the resistance value at the test pins will vary widely
from pin-to-pin as well as from part-to-part. The user should
not make any physical nor electrical connections to Pin 1 and
Pin 5.
REF19xGP
REF19xES3
REF19xFS3
REF19xGS
–40°C to +85°C 8-Lead Plastic DIP2 N-8
–40°C to +85°C 8-Lead SOIC
–40°C to +85°C 8-Lead SOIC
–40°C to +85°C 8-Lead SOIC
SO-8
SO-8
SO-8
RU-8
REF19xGRU –40°C to +85°C 8-Lead TSSOP
REF19xGBC +25°C
DICE
NOTES
1N = Plastic DIP, SO = Small Outline, RU = Thin Shrink Small Outline.
28-Lead plastic DIP only available in “G” grade.
3REF193 and REF196 are available in “G” grade only.
REV. D
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 1999
5秒后页面跳转
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
AMD宣布全球裁员约1000人，调整战略聚焦增长
英伟达新AI芯片Rubin或提前半年亮相
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
