RCV e3
Vishay Draloric
www.vishay.com
High Voltage (Up to 3 kV) Thick Film Chip Resistors
FEATURES
• High operating voltage (up to 3 kV)
• Low voltage coefficient of resistance (VCR):
25 ppm/V
• UL 1676 recognition for RCV2010 e3 and
RCV2512 e3 only; UL file no. E526561
• IEC 62368-1 ed. 3 compliant for RCV2010 e3 and
RCV2512 e3 only
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3
D
APPLICATIONS
3D Models
• E-meter
The RCV e3 high voltage thick film chip resistors series is the
perfect choice for modern electronics with high voltage
requirements. Typical applications include E-meter, AC
power supplies, lighting ballasts and inverters for industrial
drives, aircons, and white good.
• Inverters for industrial drives, aircons, and white good
• AC power supplies
• Lighting ballasts
TECHNICAL SPECIFICATIONS
DESCRIPTION
RCV0805 e3
0805
RCV1206 e3
1206
RCV2010 e3
2010
RCV2512 e3
2512
Imperial size
Metric size code
Resistance range
Resistance tolerance
Temperature coefficient
Voltage coefficient
RR2012M
RR3216M
RR5025M
RR6332M
100 kΩ to 10 MΩ
100 kΩ to 100 MΩ
5 %; 1 %
200 ppm/K; 100 ppm/K
25 ppm/V
(1)
Rated dissipation, P70
0.125 W
400 V
0.25 W
500 V
0.75 W
2000 V
1 W
Operating voltage, Umax. ACRMS/DC
Permissible film temperature, ϑF max.
Operating temperature range
3000 V
(1)
155 °C
-55 °C to +155 °C
Max. resistance change at P70
for resistance range, |ΔR/R| after:
1000 h
≤ 1.0 %
≤ 1.0 %
≤ 2.0 %
≤ 2.0 %
Approval UL 1676 recognition file
Approval IEC 62368-1
E526561
-
-
Ed. 3 approved
Permissible voltage against ambient
(insulation):
1 min, Uins
> 500 V
Notes
•
Application-specific safety requirements may set limitations to the applicability of the specified voltage
Please refer to APPLICATION INFORMATION below
(1)
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 05-Jan-2023
Document Number: 20054
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000