RClamp7002M
RailClamp
Low Capacitance TVS Diode Array
PROTECTION PRODUCTS - RailClamp
Features
Description
RailClamps are surge rated diode arrays designed to
protect high speed data interfaces. The RClamp series
has been specifically designed to protect sensitive
components from overvoltage caused by ESD (electro-
static discharge), CDE (cable discharge events), EFT
(electrical fast transients), and lightning. The
RClampTM7002M has been optimized for use on the
next generation of ADSL interfaces. Their high surge
capability makes them particularly useful in systems
that utilize gas tubes as the primary protection compo-
nent.
1000 Watts peak pulse power (8/20µs)
Protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 1kV, 24A (1.2/50µs)
Low clamping voltage: 10V at Ipp = 40A (8/20µs)
Array of surge rated suppression diodes
Protects two high speed lines
Low capacitance: 10pF (I/O to Ground)
Operating voltage range: 3.3 - 70V
Small package saves board space
This device integrates surge rated, low capacitance
steering diodes in a small MSOP-10L package. Each
protection diode features a large area junction to
minimize clamping voltage and increase reliability
during high current surges. It has a maximum capaci-
tance of only 10pF and may be used to protect two
high-speed lines without sacrificing signal integrity. The
RClamp7002M may be used on systems operating
from 3.3 to 70 volts. This means that they may be
used in applications that use the Central Office battery
as the main supply.
Solid-state silicon-avalanche technology
Mechanical Characteristics
JEDEC MSOP-10L package
Molding compound flammability rating: UL 94V-0
Marking: Marking code and date code
Packaging: Tape and Reel per EIA 481
Lead Finish: Matte tin
RoHS/WEEE Compliant
Applications
The RClamp7002M is also designed for easy board
layout by allowing the signal traces to run straight
through the device. The high surge capability, ease of
layout coupled with the low capacitance and clamping
voltage of the RClamp7002M makes it the superior
choice for protecting two high speed lines against high
energy telecommunication surges.
ADSL Lines
Central Office Equipment
T1/E1 secondary IC Side Protection
Small Office Home Office (SOHO) Applications
WAN/LAN Equipment
ISDN S/T Interface
ATM Interfaces
Circuit Diagram
PIN Configuration
Pin 7, 8, 9
Line 1
In
Line 1
Out
1
GND
GND
GND
Vcc
Vcc
Pin 1
Pin 10
Pin 5
Pin 6
Vcc
Line 2
In
Line 2
Out
Pin 2, 3,4
MSOP-10L (Top View)
www.semtech.com
Revision 12/26/2005
1