RCL e3
Vishay Draloric
www.vishay.com
Long Side Termination Thick Film Chip Resistors
FEATURES
• Enhanced power rating
• Long side terminations
• Enhanced thermo cycling performance in 0406
size
• Pure tin solder contacts on Ni barrier layer,
provides compatibility with lead (Pb)-free and lead
containing soldering processes
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
LIMITING
ELEMENT
VOLTAGE
Umax.
ACRMS/DC
V
POWER
RATING
P70
CASE
SIZE
INCH
CASE
SIZE
METRIC
TEMPERATURE
COEFFICIENT
ppm/K
RESISTANCE
RANGE
TOLERANCE
%
MODEL
SERIES
W
100
200
1
5
E24; E96
E24
0406
RR 1016M
0.25
50
1 to 1M
1 to 1M
1 to 2.2M
1 to 1M
RCL0406 e3
RCL0612 e3
RCL1218 e3
RCL1225 e3
Zero-Ohm-Resistor: Rmax. = 10 m, Imax. at 70°C = 4.0 A
0612 RR 1632M 0.5 75
Zero-Ohm-Resistor: Rmax. = 10 m, Imax. at 70°C = 6.0 A
1218 RR 3246M 1.0 200
Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70°C = 7.0 A
1225 RR 3263M 200
2.0 (1)
Zero-Ohm-Resistor: Rmax. = 10 m, Imax. at 70°C = 12 A
100
200
1
5
E24; E96
E24
100
200
1
5
E24; E96
E24
100
200
1
5
E24; E96
E24
Notes
•
These resistors do not feature a lifetime limitation when operated within the limits of rated dissipation, permissible operating voltage and
permissible film temperature. However, the resistance typically increases due to the resistor’s film temperature over operating time, generally
known as drift. The drift may exceed the stability requirements of an individual application circuit and thereby limits the functional lifetime.
Marking and packaging: See datasheet “Surface Mount Resistor Marking” (www.vishay.com/doc?20020). No marking for 0406 size.
Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
Specified power rating requires dedicated mounting conditions to achieve the required thermal resistance.
•
•
(1)
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
W
RCL0406
0.25
RCL0612
0.5
RCL1218
1.0
RCL1225
2.0 (3)
200
(2)
Rated Dissipation at P70
Operating Voltage Umax. ACRMS/DC
Insulation Voltage Uins (1 min)
Insulation Resistance
V
50
75
200
V
100
100
300
300
> 109
Operating Temperature Range
Weight
°C
mg
-55 to +155
3.5
11
29.5
55
Notes
(2)
The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
Specified power rating requires dedicated mounting conditions to achieve the required thermal resistance.
(3)
Revision: 21-Aug-14
Document Number: 20046
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000