• 30mW max. No Load Power Consumption
• High Efficiency up to 80%
• Isolated Output 3kVAC / 1 min
• SCP, OVP Protection
Features
AC/DC Converter
Regulated
Converters
• Wide Operating Temperature Range:
-40°C to +85°C
• Universal Input 85-305VAC
RAC03-SE/277/W
3 Watt
Single
Description
3
The ultra-compact wired RAC03-SE/277/W modules are available with output voltages of
3.3, 5, 12 and 24V, and the input-to-output isolation is 3kVAC/1min. With a standby
consumption of 30mW typical, the mini power supplies are particularly suitable for energy-saving
sleep mode and standby applications. Because of its compact design (height <18mm), it is a
versatile solution for home automation and other similar applications. Complete with an integrated
input filter, the series has enhanced EMI performance and complies with EN55022, class B. The mini
power supplies are also protected against short circuit with fully automatic restart after the error has
been solved. The converters are EN/UL60950-1 certified and come complete with a 3 year warranty.
Output
Selection Guide
Part
Number
nom. Input
Voltage Range
[VAC]
Output
Voltage
[VDC]
Output
Current
[mA]
Efficiency
typ.
Max. Capacitive
Load (1)
[%]
[µF]
RAC03-3.3SE/277/W
RAC03-05SE/277/W
RAC03-12SE/277/W
RAC03-24SE/277/W
100-277
100-277
100-277
100-277
3.3
5
12
24
900
600
250
125
71
76
78
80
22000
7500
1000
200
Notes:
Note1: Test by minimum input and constant resistor load.
E224736
Specifications (measured @ ta= 25°C, nominal input voltage (115/230VAC), full load and after warm-up)
EN55024 Certified
EN60950-1 Certified
UL60950-1 Certified
EN60335-1 Certified
BASIC CHARACTERISTICS
Parameter
Condition
Min.
85VAC
120VDC
Typ.
Max.
305VAC
430VDC
Input Voltage Range
115VAC
230VAC
70mA
45mA
Input Current
Inrush Current
115VAC
230VAC
15A
30A
cold start at +25°C
No load Power Consumption
Input Frequency Range
85-305VAC, 47-63Hz
AC Input
30mW
440Hz
47Hz
115VAC
230VAC
15ms
80ms
Hold-up time
Internal Operating Frequency
Minimum Load
100% load at nominal Vin
55kHz
2%
Output Ripple and Noise (2)
200mVp-p
Notes:
Note2: Ripple and Noise is the maximum peak-to-peak voltage value measured at the output with a
20MHz bandwidth, at rated line voltage at full load. And with a 47µF low-ESR electrolytic
capacitor in parallel with a 0.1µF ceramic capacitor across output.
continued on next page
www.recom-power.com
REV.: 7/2017
PA-1