MODEL: R7E
Remote I/O R7 Series
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
ETHERNET I/O MODULE
(Modbus/TCP)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7807-x)
ORDERING INFORMATION
• Basic module: R7E-[1]-R[2]
EXTENSION MODULE: R7E–[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R7E-DC16A-R/Q)
[1] I/O TYPE
EA8: Discrete input, 8 points
• Specify the specification for option code /Q
(e.g. /C01/SET)
EA16: Discrete input, 16 points
EC8A: NPN transistor output, 8 points
EC16A: NPN transistor output, 16 points
EC8B: PNP transistor output, 8 points
EC16B: PNP transistor output, 16 points
• Extension module: R7E-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R7E-EC16B/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[2] OPTIONS
blank: none
/Q: Option other than the above (specify the specification)
BASIC MODULE: R7E–[1]–R[2]
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
[1] I/O TYPE
DA16: Discrete input, 16 points
DC16A: NPN transistor output, 16 points
DC16B: PNP transistor output, 16 points
SV4: DC voltage/current input (10 V/20 mA), 4 points
TS4: Thermocouple input, 4 points
RS4: RTD input, 4 points
/C02: Polyurethane coating
/C03: Rubber coating
FUNCTIONS & FEATURES
MS4: Potentiometer input, 4 points
CT4E: AC current input, 4 points,
clamp-on current sensor CLSE use
PA8: Totalized pulse input, 8 points,
(CE not available)
The R7E interfaces analog and discrete I/O signals with a
PLC or PC via Ethernet Modbus/TCP nerwork.
A ‘basic’ module can be attached with an ‘extension’
module. By combining two modules, single station can
handle mixed analog and discrete signals, 32-point discrete
inputs, 32-point discrete outputs, 16-point discrete I/Os and
other
YV2: DC voltage output, 2 points
YS2: DC current output, 2 points
combinations of signals.
Input sensor type (thermocouple, RTD) and range can be
selected with the front DIP switches for all channels. In
order to set different selections for individual channels, the
PC Configurator Software (model: R7CON) is used.
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 1/31
http://www.m-system.co.jp/