Datasheet
R01DS0282EJ0110
Rev. 1.10
RL78/G11
RENESAS MCU
Dec 28, 2016
True Low Power Platform (as low as 58.3 A/MHz, and 0.64 A for LVD), 1.6 V to 5.5 V operation, 16
Kbyte Flash, 33 DMIPS at 24 MHz, for General Purpose Applications
1. OUTLINE
1.1
Features
Ultra-low power consumption technology
• VDD = 1.6 V to 5.5 V
• HALT mode
Middle-speed on-chip oscillator
• Selectable from 4 MHz, 2 MHz, and 1 MHz.
• STOP mode
Operating ambient temperature
• SNOOZE mode
• TA = -40 to +85°C (A: Consumer applications)
• TA = -40 to +105°C (G: Industrial applications)
RL78 CPU core
• CISC architecture with 3-stage pipeline
• Minimum instruction execution time: Can be
changed from high speed (0.04167 s: @ 24 MHz
operation with high-speed on-chip oscillator) to
ultra-low speed (66.6 s: @ 15 kHz operation with
low-speed on-chip oscillator clock)
• Multiply/divide/multiply & accumulate instructions
are supported.
Power management and reset function
• On-chip power-on-reset (POR) circuit
• On-chip voltage detector (LVD) (Select interrupt
and reset from 14 levels)
Data transfer controller (DTC)
• Transfer modes: Normal transfer mode, repeat
transfer mode, block transfer mode
• Activation sources: Activated by interrupt sources.
• Chain transfer function
• Address space: 1 Mbytes
• General-purpose registers: (8-bit register 8) 4
banks
• On-chip RAM: 1.5 Kbytes
Event link controller (ELC)
• Event signals of 18 types can be linked to the
specified peripheral function.
Code flash memory
• Code flash memory: 16 Kbytes
• Block size: 1 Kbytes
Serial interfaces
• On-chip debug function
• CSI: 4 channels
• Self-programming (with boot swap function/flash
shield window function)
• UART: 2 channel
• I2C/simplified I2C: 4 channels
• Multimaster I2C: 2 channels
Data flash memory
• Data flash memory: 2 Kbytes
Timers
• Back ground operation (BGO): Instructions can be
executed from the program memory while
rewriting the data flash memory.
• 16-bit timer (TAU): 4 channels
• TKB: 1 channel
• 12-bit interval timer: 1 channel
• 8-bit interval timer: 2 channels
• Watchdog timer: 1 channel
• Number of rewrites: 1,000,000 times (TYP.)
• Voltage of rewrites: VDD = 1.8 to 5.5 V
High-speed on-chip oscillator
• Select from 48 MHz, 24 MHz, 16 MHz, 12 MHz, 8
MHz, 6 MHz, 4 MHz, 3 MHz, 2 MHz, and 1 MHz
• High accuracy: ±1.0% (VDD = 1.8 to 5.5 V, TA = -
20 to +85°C)
R01DS0282EJ0110 Rev. 1.10
Dec 28, 2016
Page 1 of 135