R5325x SERIES
150mA Dual LDO REGULATOR
OUTLINE
NO.EA-127-071112
The R5325x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply
current (Typ. 3.0μA), low dropout, and fast transient response. Each of these voltage regulator ICs consists of a
voltage reference unit, an error amplifier, resistors for setting output voltage, a current limit circuit, and a chip
enable circuit.
These ICs perform with low dropout voltage due to built-in transistor with low ON resistance, and a chip enable
function prolongs the battery life of each system. The line transient response and load transient response of the
R5325x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication
equipment.
The supply current at no load of R5325x Series is remarkably reduced compared with R5323x Series. The
mode change signal to reduce the supply current is not necessary.
The output voltage of these ICs is internally fixed with high accuracy (±1.0%). Since the packages for these
ICs are SOT-23-6 and DFN(PLP)1820-6 package, dual LDO regulators are included in each, high density
mounting of the ICs on boards is possible.
FEATURES
• Input Voltage .................................................................1.5V to 6.0V
• Output Voltage ..............................................................1.2V to 4.0V
• Output Voltage Accuracy...............................................±1.0%
• Supply Current..............................................................Typ. 3.0µA (VR1, VR2)
• Standby Current............................................................Typ. 0.1μA (VR1, VR2)
• Dropout Voltage ............................................................Typ. 0.2V (IOUT=150mA ,VOUT=3.0V)
• Ripple Rejection............................................................Typ. 55dB (f=1kHz)
• Built-in fold-back protection circuit................................Typ. 50mA (Current at short mode)
• Temperature-Drift Coefficient of Output Voltage...........Typ. ±100ppm/°C
• Line Regulation.............................................................Typ.0.1%/V
• Built-in chip enable circuit (active “H”)
• Fast Transient Response Time from large load current to small load current. (50% less than R5323x)
• Packages .....................................................................SOT-23-6, DFN(PLP)1820-6
• Ceramic Capacitor is recommended. (0.1μF or more)
APPLICATIONS
• Power source for handheld communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
1