MODEL: R5-SS
Input range: Selectable with the side DIP SW
Remote I/O R5 Series
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
DC CURRENT INPUT MODULE
18 (.71)
INPUT SPECIFICATIONS
■ NARROW SPAN: -1 – +1 mA, 0 – 1 mA DC
Input resistance: 1600 Ω resistor incorporated
■ WIDE SPAN: -40 – +40 mA, -20 – +20 mA 0 – 40 mA, 0 –
20 mA, 4 – 20 mA DC
90
(3.54)
96.5
(3.80)
Input resistance: 40 Ω resistor incorporated
mm (inch)
INSTALLATION
MODEL: R5-SS[1][2][3]
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 100 g (3.53 oz)
ORDERING INFORMATION
• Code number: R5-SS[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. R5-SS2W/Q)
• Specify the specification for option code /Q
(e.g. /C01)
PERFORMANCE
Conversion accuracy: ±0.1 %
Data range: 0 – 10000 of the input range
Data allocation: 1 (2 for 2-channel type)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input 1 to input
2 to internal bus or internal power)
[1] NO. OF CHANNELS
1: 1 channel
2: 2 channels
[2] COMMUNICATION MODE
S: Single
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
W: Dual
[3] OPTIONS
blank: none
STANDARDS & APPROVALS
EU conformity:
/Q: With options (specify the specification)
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
EN 50581
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
Input: Euro type connector terminal
(Applicable wire size: 0.2 – 2.5 mm
2
(AWG24 - 12),
stripped length 7 mm)
Internal power: Via the base (model: R5-BS)
Isolation: Input 1 to input 2 to internal bus or internal power
R5-SS SPECIFICATIONS
ES-6143 Rev.7 Page 1/3
http://www.m-system.co.jp/