MODEL: R5-SV1A
I/O: Euro type connector terminal
Remote I/O R5 Series
(Applicable wire size: 0.2 – 2.5 mm
2
(AWG24 - 12),
stripped length 7 mm)
DC VOLTAGE INPUT MODULE
Internal power: Via the base (model: R5-BS)
Isolation: Input to output to internal bus or internal power
Zero/Span adj. mode selector: Rotary switch; monitor mode,
adj. mode and simulated output mode selectable
Input range: Selectable with the side DIP SW
RUN indicator: Bi-color (red/green) LED;
(re-transmitted output)
18 (.71)
2
3
4
1
5
0
7 6
9
8
90
(3.54)
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
96.5
(3.80)
mm (inch)
INPUT SPECIFICATIONS
■ Narrow Span: -1 – +1 V, 0 – 1 V DC
Input resistance: 100 kΩ min.
■ Wide Span: -10 – +10 V, -5 – +5 V,
0 – 10 V, 0 – 5 V, 1 – 5 V DC
MODEL: R5–SV1A[1][2]
ORDERING INFORMATION
• Code number: R5-SV1A[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R5-SV1AW/Q)
Input resistance: 1 MΩ min.
OUTPUT SPECIFICATIONS
Operational range: Approx. 0 – 24 mA DC
• Specify the specification for option code /Q
(e.g. /C01)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 100 g (3.53 oz)
NO. OF CHANNELS
1: 1 channel
OUTPUT
Current
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
PERFORMANCE
Conversion accuracy
[1] COMMUNICATION MODE
S: Single
Input: ±0.05 %
Output: ±0.1 % of the retransmitted range + input
conversion accuracy
W: Dual
Data range: 0 – 10000 of the input range
Data allocation: 1
[2] OPTIONS
Temp. coefficient
blank: none
Input: ±0.015 %/°C (±0.008 %/°F)
Output: ±0.02 %/°C (±0.01 %/°F)
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input to output
to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Connection
STANDARDS & APPROVALS
EU conformity:
Internal bus: Via the Installation Base (model: R5-BS)
EMC Directive
R5-SV1A SPECIFICATIONS
ES-7568 Rev.7 Page 1/3
http://www.m-system.co.jp/