R.49
Taped
Fig.2
Loose
X1 CLASS (IEC 60384-14) - MKP Series
meTAllized PꢆlYPRꢆPYlene Film CAPACiTꢆR
SELF-HEALING PRꢀPERTIES
Fig.1
Typꢀcaꢂ appꢂꢀcatꢀoꢃs: interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
PERMANENTLY
Class X1 shall be applied for
shock.
APPARATUS
CꢀNNECTED
Not for use in series with the mains.
.
See www.kemet.com for more information.
2
Insulated rigid leads
Insulated flexible leads 0.5mm
Note: PeRmAnenTlY CꢆnneCTed APPARATUS:
apparatus which is intended for connection to the mains
by a connection which cannot be loosened BY HAnd.
BY HAnd:
operation that does not require the use of any object
such a tool, coin, etc.
PRꢀDUCT CꢀDE: R49
notꢁ: R.49 series has replaced the 1.58 series (available
upon request). For new design we suggest the use of
the R.49 series.
p ≤15
22.5 ≤ p ≤ 27.5
p = 37.5
1.0
Pitch Box thickness (B)
Maximum dimensions (mm)
Ø d ±0.05
(mm)
(mm)
B max
H max
L max
0.6 or 0.8*
0.8
10.0
15.0
15.0
22.5
27.5
37.5
All
<7.5
≥7.5
All
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
*See size table.
All dimensions are in mm.
All
GeneRAl TeCHniCAl dATA
All
dꢀꢁꢂꢁctrꢀc: polypropylene film.
Pꢂatꢁs: metal layer deposited by evaporation under vacuum.
Wꢀꢃꢄꢀꢃg: non-inductive type.
TeST meTHꢆd And PeRFꢆRmAnCe
daꢅp hꢁat, stꢁaꢄy statꢁ:
lꢁaꢄs: tinned wire.
Tꢁst coꢃꢄꢀtꢀoꢃs
Protꢁctꢀoꢃ: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Temperature:
Relative humidity (RH):
Test duration:
+40°C±2°C
93% ±2%
56 days
markꢀꢃg: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Pꢁrforꢅaꢃcꢁ
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤5%
Cꢂꢀꢅatꢀc catꢁgory: 40/110/56 IEC 60068-1
Insulation resistance:
≥50% of initial limit.
ꢆpꢁratꢀꢃg tꢁꢅpꢁraturꢁ raꢃgꢁ: -40 to +110°C
eꢃꢄuraꢃcꢁ:
Rꢁꢂatꢁꢄ ꢄocuꢅꢁꢃts:
IEC 60384-14, EN 60384-14.
eleCTRiCAl CHARACTeRiSTiCS
Tꢁst coꢃꢄꢀtꢀoꢃs
Ratꢁꢄ voꢂtagꢁ (VR):
310Vac / 800Vdc; (50/60Hz)
330Vac / 800Vdc; (50/60Hz)
0.01µF to 6.8µF
Temperature:
Test duration:
Voltage applied:
Pꢁrforꢅaꢃcꢁ
+110°C±2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Capacꢀtaꢃcꢁ raꢃgꢁ:
Capacꢀtaꢃcꢁ vaꢂuꢁs: E6 series (IEC 60063 Norm).
Capacꢀtaꢃcꢁ toꢂꢁraꢃcꢁs (measured at 1 kHz):
±10% (K); ±20% (M);
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Tolerance ±5% (J) available upon request.
Capacitance change |∆C/C|: ≤10%
Insulation resistance:
Rꢁsꢀstaꢃcꢁ to soꢂꢄꢁrꢀꢃg hꢁat:
≥50% of initial limit.
dꢀssꢀpatꢀoꢃ factor (dF):
tgδx10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz
Typical value
*
Tꢁst coꢃꢄꢀtꢀoꢃs
iꢃsuꢂatꢀoꢃ rꢁsꢀstaꢃcꢁ:
Tꢁst coꢃꢄꢀtꢀoꢃs
Temperature:
Voltage charge time:
Voltage charge:
Pꢁrforꢅaꢃcꢁ
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Pꢁrforꢅaꢃcꢁ
+25°C±5°C
1 min
100 Vdc
Capacitance change |∆C/C|: ≤2%
Wꢀꢃꢄꢀꢃg schꢁꢅꢁ
≥1x105 MΩ (5x105 MΩ )*
≥30000 s (150000 s)*
* Typical value
for C≤0.33µF
for C>0.33µF
Tꢁst voꢂtagꢁ bꢁtwꢁꢁꢃ tꢁrꢅꢀꢃatꢀoꢃs (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
single sided metallized
polypropylene film
09/2008
165