MODEL: R30MS4
Remote I/O R30 Series
CAUTION
■ UNUSED INPUT CHANNELS
Set unused channels to "CH disabled" with PC Configurator
software (model: R30CFG). Otherwise, unused channels left
open are unstable.
POTENTIOMETER INPUT MODULE
(4 points, isolated)
Functions & Features
• 4 channels for potentiometer input remote I/O module
• Isolation between input channels
RELATED PRODUCTS
• PC configurator software (model: R30CFG)
Downloadable at M-System’s web site.
For connecting to PC, use commercially available Mini-B
type USB cable. (provided by user)
25 [.98]
110
[4.33]
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R30BS)
Input: M3 separable screw terminal (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R30BS)
Solderless terminal: Refer to the drawing at the end of the
section.
98
[3.86]
mm [inch]
Recommended manufacturer: Japan Solderless Terminal
MFG. Co., Ltd., Nichifu Co., Ltd.
MODEL: R30MS4S[1]
(Solderless terminals with insulation sleeve do not fit.)
Applicable wire size: 0.25 to 0.75 mm
2
ORDERING INFORMATION
• Code number: R30MS4S[1]
Specify a code from below for [1].
(e.g. R30MS4S/Q)
Screw terminal: Nickel-plated steel
Isolation: Input 1 to input 2 to input 3 to input 4 to internal
bus or internal power
Input range: Selectable with PC configuration software
(model: R30CFG)
• Specify the specification for option code /Q
(e.g. /C01/SET)
Conversion rate: Selectable with PC configuration software
(model: R30CFG)
Status indicator LED: RUN, ERR
NO. OF CHANNELS
(refer to the instruction manual)
4: 4
■Recommended solderless terminal size - M3 (unit: mm)
3 max.
COMMUNICATION MODE
3.2 dia.
S: Single
[1] OPTIONS
blank: none
12 max.
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-9004)
R30MS4 SPECIFICATIONS
ES-9004 Rev.3 Page 1/5
https://www.m-system.co.jp/