5秒后页面跳转
R3-MEX2S PDF预览

R3-MEX2S

更新时间: 2024-11-21 02:50:11
品牌 Logo 应用领域
爱模 - MSYSTEM /
页数 文件大小 规格书
4页 122K
描述
Remote I/O R3 Series VALVE POSITIONER MODULE

R3-MEX2S 数据手册

 浏览型号R3-MEX2S的Datasheet PDF文件第2页浏览型号R3-MEX2S的Datasheet PDF文件第3页浏览型号R3-MEX2S的Datasheet PDF文件第4页 
MODEL: R3-MEX2  
/C02: Polyurethane coating  
Remote I/O R3 Series  
/C03: Rubber coating  
VALVE POSITIONER MODULE  
(for 2 systems; built-in SSR)  
CAUTION  
This unit is not designed to be used with the following types  
of interface modules (models: R3-NC2, R3-NEIP1, R3-NFx,  
R3-NLx).  
27.5 (1.08)  
Please use this unit with interface modules (models: R3-  
NC1, R3-NC3, R3-NDx, R3-NE1, R3-NFL1, R3-NM1, R3-NM4,  
R3-NP1) of firmware version V2.00 or higher, and interface  
modules (models: R3-NM3, R3-NML3) of firmware version  
V1.00 or higher.  
130  
(5.12)  
109  
(4.29)  
mm (inch)  
GENERAL SPECIFICATIONS  
Connection  
Internal bus: Via the Installation Base (model: R3-BSx)  
Input, Output: M3 separable screw terminal  
(torque 0.5 N·m)  
MODEL: R3–MEX2[1][2]  
ORDERING INFORMATION  
• Code number: R3-MEX2[1][2]  
Specify a code from below for each of [1] and [2].  
(e.g. R3-MEX2W/CE/Q)  
Internal power: Via the Installation Base (model: R3-BSx)  
Screw terminal: Nickel-plated steel  
Full-close position setting range:  
0 - 25 % (factory default: 0 %)  
• Specify the specification for option code /Q  
(e.g. /C01)  
Full-open position setting range:  
75 - 100 % (factory default: 100 %)  
Deadband adjustment:  
0.1 – 8.0 % adjustable (factory default: 1.5 %)  
Restart limiting timer:  
VALVE POSITIONER  
2: 2 systems  
0.5 to 10 sec. (factory default: 2 sec.)  
Motor deadlock detecting time:  
FEEDBACK RESISTANCE  
Potentiometer input  
60 – 1000 sec. (factory default: 120 sec.)  
Isolation: Cotrol output 1 to control output 2 to feedback  
potentiometer 1 or feedback potentiometer 2 or internal bus  
or internal power  
CONTROL OUTPUT  
RUN indicator: Bi-color (red/green) LED;  
Red when the bus A operates normally;  
Green when the bus B operates normally;  
Amber when both buses operate normally.  
ERR indicator: Green LED turns on in normal operating  
conditions.  
Built-in SSR  
[1] COMMUNICATION MODE  
S: Single  
W: Dual  
[2] OPTIONS (multiple selections)  
Standards & Approvals  
blank: Without CE  
INPUT SPECIFICATIONS  
■ Feedback Potentiometer: 100 Ω – 10 kΩ  
Minimum span: 50 % of total resistance  
Excitation: Approx. 3.3 V DC  
/CE: CE marking  
Other Options  
blank: none  
/Q: Option other than the above (specify the specification)  
SPECIFICATIONS OF OPTION: Q  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
R3-MEX2 SPECIFICATIONS  
ES-8279 Rev.2 Page 1/4  
https://www.m-system.co.jp/  

与R3-MEX2S相关器件

型号 品牌 获取价格 描述 数据表
R3-MEX2S/CE MSYSTEM

获取价格

Remote I/O R3 Series VALVE POSITIONER MODULE
R3-MEX2S/Q MSYSTEM

获取价格

Remote I/O R3 Series VALVE POSITIONER MODULE
R3-MEX2W MSYSTEM

获取价格

Remote I/O R3 Series VALVE POSITIONER MODULE
R3-MEX2W/CE MSYSTEM

获取价格

Remote I/O R3 Series VALVE POSITIONER MODULE
R3-MEX2W/Q MSYSTEM

获取价格

Remote I/O R3 Series VALVE POSITIONER MODULE
R3-MS4 MSYSTEM

获取价格

Remote I/O R3 Series POTENTIOMETER INPUT MODULE
R3-MS4S MSYSTEM

获取价格

Remote I/O R3 Series POTENTIOMETER INPUT MODULE
R3-MS4S/CE MSYSTEM

获取价格

Remote I/O R3 Series POTENTIOMETER INPUT MODULE
R3-MS4S/Q MSYSTEM

获取价格

Remote I/O R3 Series POTENTIOMETER INPUT MODULE
R3-MS4W MSYSTEM

获取价格

Remote I/O R3 Series POTENTIOMETER INPUT MODULE