Datasheet > R3-NC1-L3

R3-NC1-L3

更新时间： 2024-11-06 02:48:27

品牌	Logo	应用领域
爱模 - MSYSTEM		/
页数	文件大小	规格书
7页	203K
描述
Remote I/O R3 Series CC-Link INTERFACE MODULE

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

R3-NC1-L3 数据手册

MODEL: R3-NC1

Remote I/O R3 Series

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

CC-Link INTERFACE MODULE

(CC-Link Ver.1.10; for 16-point analog signals)

/C02: Polyurethane coating

/C03: Rubber coating

27.5 [1.08]

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-8355)

130

[5.12]

PACKAGE INCLUDES...

• Terminating resistor (110 Ω, 0.5 W)

109

[4.29]

GENERAL SPECIFICATIONS

Connection

mm [inch]

CC-Link: Euro type connector terminal

(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)

MODEL: R3-NC1-[1][2]

Internal bus: Via the Installation Base

(model: R3-BSx)

ORDERING INFORMATION

• Code number: R3-NC1-[1][2]

Internal power: Via the Installation Base (model: R3-BSx)

Power input, RUN contact output: M3 separable screw

terminal (torque 0.5 N·m)

Specify a code from below for each of [1] and [2].

(e.g. R3-NC1-N/CE/W/Q)

Screw terminal: Nickel-plated steel

• Specify the specification for option code /Q

(e.g. /C01/SET)

Isolation: CC-Link to internal bus or internal power to power

supply to RUN contact output to FG

Input error data setting: Input value setting at input module

error with side DIP SW

[1] POWER INPUT

Dual communication setting: Set with the side DIP switch

Data allocation setting: Set with the side DIP switch

RUN indicator: Bi-color (green/red) LED; Green ON in normal

communication; Red ON when receiving data (Function

selected with DIP SW)

N: No power supply

AC Power

K3: 100 – 120 V AC

(Operational voltage range 85 - 132 V, 47 - 66 Hz) *

(CE not available)

ERR indicator: Bi-color (green/red) LED;

L3: 200 – 240 V AC

Green ON or blinking at communication error (OFF with

cable disconnection, blinking in setting error); Red ON at

transmitting data (Function selected with DIP SW)

■ RUN CONTACT OUTPUT

(Operational voltage range 170 - 264 V, 47 - 66 Hz) *

(CE not available)

DC Power

R: 24 V DC

RUN contact: Turns ON while the green RUN LED is ON (CC-

Link in normal communication).

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) *

* Not selectable for use with independent power modules or

network modules with the internal power input options.

Rated load: 250 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 0.5 A (resistive load)

(Less than 50 V AC to conform with EU Directive)

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA or 150 W

Minimum load: 1 V DC @ 1 mA

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Mechanical life: 2 × 10 cycles (300 cycles/min.)

Mitsubishi PLC Redundant System

blank: Without

When driving an inductive load, external contact protection

and noise quenching recommended.

/W: With

Other Options

blank: none

/Q: Option other than the above (specify the specification)

R3-NC1 SPECIFICATIONS

ES-8355 Rev.22 Page 1/7

https://www.m-system.co.jp/

12 3 4 5 6 7

中文翻译

下载PDF

与R3-NC1-L3相关器件

型号	品牌	获取价格	描述	数据表
R3-NC1-L3/CE	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC1-L3/Q	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC1-L3/W	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC1-R	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC1-R/CE	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC1-R/Q	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC1-R/W	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC2	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC2-K3	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE
R3-NC2-K3/CE	MSYSTEM	获取价格	Remote I/O R3 Series CC-Link INTERFACE MODULE

与R3-NC1-L3相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

10
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

31

产品中心

服务支持

精选活动

关于我们

帮助中心

R3-NC1-L3

R3-NC1-L3 数据手册

与R3-NC1-L3相关器件

与R3-NC1-L3相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

R3-NC1-L3

R3-NC1-L3 数据手册

与R3-NC1-L3相关器件

与R3-NC1-L3相关文章

您还可以找

您在本页遇到什么问题？