'2002.7.17
LOW NOISE 150mA LDO REGULATOR
R1114X SERIES
g
OUTLINE
The R1114X Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current,
low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier,
resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient
response of the R1114X Series are excellent, thus these ICs are very suitable for the power supply for hand-held
communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5 and SC82-AB,
therefore high density mounting of the ICs on boards is possible.
g
FEATURES
l
l
l
l
l
l
l
l
l
Low Supply Current......................................................... Typ. 75mA
Standby Mode................................................................... Typ. 0.1mA
Low Dropout Voltage ...................................................... Typ. 0.22V (IOUT=150mA 3.0V Output type)
High Ripple Rejection..................................................... Typ. 70dB (f=1kHz 3.0V Output type) / 60dB (f=10kHz)
Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/ °C
Excellent Line Regulation .............................................. Typ. 0.02%/V
High Output Voltage Accuracy...................................... ±2.0%
Small Package ..................................................................SOT-23-5/SC82-AB
Output Voltage..................................................................Stepwise setting with a step of 0.1V in the range of 1.5V to 4.0V is
possible
l
l
Built-in Fold Back Protection Circuit ...........................Typ. 40mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC
CIN=COUT=1mF(VOUT<2.5V)
......................................................................................................
CIN=1mF, COUT=0.47mF (VOUT³ 2.5V)
g
APPLICATIONS
l
l
l
Power source for portable communication equipment.
Power source for electrical appliances such as cameras, VCRs and camcorders.
Power source for battery-powered equipment.
Rev. 1.10
- 1 -