MODEL: R10M-CT4E
Plug-in Remote I/O R10 Series
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODBUS I/O MODULE
(4 points, RMS sensing, clamp-on current sensor input)
/C02: Polyurethane coating
/C03: Rubber coating
Functions & Features
• Plug-in construction
• Modbus-RTU protocol communication
• Easy-to-install clamp-on type current sensor without
needing a current transformer
RELATED PRODUCTS
• Installation base (model: R10-BS)
• PC configurator software (model: R10CFG)
The configurator software is downloadable at M-System’s
web site.
• Wide input range from 5 A up to 600 A
• High-density mounting
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
36
[1.42]
• Clamp-on current sensor (model: CLSE)
The clamp-on current sensors, not included in this product
package, must be ordered separately. Required number
depends upon the system configuration.
99
[3.90]
125
[4.92]
PACKAGE INCLUDES...
• Terminating resistor 110Ω (0.25W)
mm [inch]
Note: The !gure shows the combination
of the unit and the base.
GENERAL SPECIFICATIONS
Construction: Plug-in
MODEL: R10M-CT4E-R[1]
Connection
• Connected to base with connector
• Base
ORDERING INFORMATION
• Code number: R10M-CT4E-R[1]
Specify a code from below for [1].
(e.g. R10M-CT4E-R/Q)
M2.6 screw terminals (torque: 0.5 N·m)
Applicable solderless terminal size (M3)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input to Modbus to power input to FE1
Input waveform
• Specify the specification for option code /Q
(e.g. /C01)
RMS sensing: Up to 15 % of 3rd harmonic content
Status indicators: Power, Run, Error
Configuration: Select sensors for 4 points (CT1, CT2, CT3,
CT4) each with PC Configurator Software (model: R10CFG)
■Recommended solderless terminal size - M3 (unit: mm)
I/O TYPE
CT4E: Clamp-on current sensor CLSE use 4 points
POWER INPUT
DC Power
3max
4min
3.2 dia.
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[1] OPTIONS
(mm)
blank: none
/Q: With options (specify the specification)
R10M-CT4E SPECIFICATIONS
ES-6247 Rev.0 Page 1/7
https://www.m-system.co.jp/