APPLICABLE STANDARD UL,CSA,TÜV
Operating
Storage
Temperature Range
Operating
-10 ℃ to 60 ℃
-10 ℃ to 60 ℃
Temperature Range
Rating Voltage
Current
(Note 1)
(Note 1)
95 % max
Humidity Range
Applicable Wire
-
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
ELECTRIC CHARACTERISTICS
Insulation Resistance
500 V DC.
5000 MΩ min.
X
X
X
X
Voltage Proof
(Note 2)
Power contact
No flashover or breakdown.
1000 V AC. for 1 min.
Signal contact
500 V AC. for 1 min.
MECHANICAL CHARACTERISTICS
Mating and Unmating Forces Measured with an applicable connector.
Mating force : 9.8 N max.
X
X
X
-
-
-
Unmating force : 9.8 N max.
Vibration
Shock
Frequency : 10 to 55 Hz, single amplitude 0.75 mm,
at 2 h each in 3 axial directions.
490 m/s2 duration of pulse 11 ms for 3 times
in 3 both axial directions.
No damage, crack and looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Rapid Change of Temperature Temperature – 55 → 5 to 35 → 85 → 5 to 35 ℃
No damage, crack and looseness of parts.
1) Insulation resistance :
Time
30 → 2 to 3 → 30 → 2 to 3 min
-
X
Under 5 cycles.
Humidity Life
Exposed at 25 to 65 ℃, 93 ± 3 %, 240 h.
1
MΩ min. (at high humidity.)
X
X
-
-
3000 MΩ min. (at dry.)
2) No damage, crack and looseness of parts.
No heavy corrosion that lose function.
Corrosion Salt Mist
Exposed in 5 % salt water spray for 48 h.
COUNT
0
REMARK
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
APPROVED
CHECKED
DESIGNED
DRAWN
TU.TANIGUCHI
TU.TANIGUCHI
TS.ITO
20181126
20181126
20181126
20181122
(Note 1) Rated voltage and current are shown in customer’s drawing.
(Note 2) 1000 V AC for contact No. 1, 4, 5, 8. 500 V AC for others.
Unless otherwise specified, refer to IEC 60512.
SJ.SATO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
ELC-021009-21-00
QR/P1-8P-C(21)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CODE NO.
CL221-0124-0-21
FORM HD0011-2-1