APPLICABLE STANDARD
UL,CSA,TÜV
-10℃ to 60℃
Operating
Storage
Temperature Range
-
-
Temperature Range
Operating
Humidity Range
Applicable Wire
Rating
Voltage
Current
(Note 1)
(Note 1)
-
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
×
×
×
×
Marking
ELECTRIC CHARACTERISTICS
Insulation Resistance
500 V DC.
5000 M min.
×
×
×
×
Voltage Proof
(Note 2)
No flashover or breakdown.
Power contact
1000 V AC. for 1 min.
Signal contact
500 V AC. for 1 min.
MECHANICAL CHARACTERISTICS
Mating force : 9.8 N max.
Mating and Unmating Forces
Measured with an applicable connector.
Unmating force : 9.8 N max.
-
×
Vibration
Shock
Frequency : 10 to 55 Hz, single amplitude 0.75 mm,
at 2 h each in 3 axial directions.
No damage, crack and looseness of parts.
-
-
×
×
490 m/s2 duration of pulse 11 ms for 3 times
in 3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Rapid Change of Temperature Temperature – 55 → 5 to 35 → 85 → 5 to 35 ℃
No damage, crack and looseness of parts.
Insulation resistance :
Time
30 → 2 to 3 → 30 → 2 to 3 min
-
×
Under 5 cycles.
Humidity Life
Exposed at 25 to 65 ℃, 93 ± 3 %, 240 h.
1
MΩ min. (at high humidity.)
-
-
×
×
3000 MΩ min. (at dry.)
Corrosion Salt Mist
Exposed in 5 % salt water spray for 48 h.
No heavy corrosion that lose function.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
TU.TANIGUCHI
TU.TANIGUCHI
TS.ITO
20181126
20181126
20181126
20181122
(Note 1) Rated voltage and current are shown in customer’s drawing.
(Note 2) 1000 V AC for contact No. 1, 4, 5, 8. 500 V AC for others.
Unless otherwise specified, refer to IEC 60512.
SJ.SATO
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-021010-21-00
QR/P1-8S-C(21)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL221-0125-3-21
FORM HD0011-2-1