QRD1113/1114
REFLECTIVE OBJECT SENSOR
FEATURES
PACKAGE DIMENSIONS
• Phototransistor Output
• No contact surface sensing
• Unfocused for sensing diffused surfaces
• Compact Package
0.083 (2.11)
PIN 1 INDICATOR
OPTICAL
CENTERLINE
0.240 (6.10)
0.173 (4.39)
0.120 (3.05)
• Daylight filter on sensor
0.183 (4.65)
NOTES (Applies to Max Ratings and Characteristics Tables.)
1. Derate power dissipation linearly 1.33 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning
agents.
0.500 (12.7)
MIN
4. Soldering iron 1/16” (1.6mm) from housing.
5. As long as leads are not under any spring tension.
6. D is the distance from the sensor face to the reflective surface.
7. Cross talk (ICX) is the collector current measured with the
indicator current on the input diode and with no reflective surface.
8. Measured using an Eastman Kodak neutral white test card with
90% diffused reflecting as a reflective surface.
0.020 (0.51)
SQ. (4X)
2
1
3
4
0.100 (2.54)
0.083 (2.11)
SCHEMATIC
PIN 1 COLLECTOR
PIN 2 EMITTER
PIN 3 ANODE
PIN 4 CATHODE
2
3
NOTES:
1. Dimensions for all drawings are in inches (millimeters).
2. Tolerance of ± .010 (.25) on all non-nominal dimensions
unless otherwise specified.
3. Pins 2 and 4 typically .050” shorter than pins 1 and 3.
4. Dimensions controlled at housing surface.
1
4
(T = 25°C unless otherwise specified)
ABSOLUTE MAXIMUM RATINGS
A
Parameter
Operating Temperature
Symbol
TOPR
Rating
Units
°C
-40 to +85
°C
Storage Temperature
TSTG
-40 to +85
Lead Temperature (Solder Iron)(2,3)
Lead Temperature (Solder Flow)(2,3)
TSOL-I
TSOL-F
240 for 5 sec
260 for 10 sec
°C
°C
EMITTER
Continuous Forward Current
IF
50
5
mA
V
Reverse Voltage
Power Dissipation(1)
VR
PD
100
mW
SENSOR
Collector-Emitter Voltage
Emitter-Collector Voltage
Power Dissipation(1)
VCEO
VECO
PD
30
V
V
100
mW
1 of 4
100030A