QME48T40 DC-DC Series Data Sheet
36-75 VDC Input; 1.0-3.3 VDC @ 40A Output
Features
• RoHS lead-free solder and lead-solder-exempted
products are available
• Delivers up to 40 A
• Outputs available: 3.3, 2.5, 1.8, 1.5, 1.2 and 1.0 V
• Industry-standard quarter-brick pinout
• On-board input differential LC-filter
• Startup into pre-biased load
• No minimum load required
• Dimensions: 1.45” x 2.30” x 0.425”
(36.83 x 58.42 x 10.80 mm)
• Weight: 1.2 oz [34.2 g]
• Meets Basic Insulation requirements of EN60950
• Withstands 100 V input transient for 100 ms
• Fixed-frequency operation
• Fully protected
• Remote output sense
• Non-Latching / Latching OTP option
• Positive or negative logic ON/OFF option
• Output voltage trim range: +10%/−20% with
Applications
• Telecommunications
• Data communications
• Wireless communications
• Servers, Workstations
industry-standard trim equations (±10% for 1.2 V
and 1.0 V)
Benefits
• High reliability: MTBF = 13.9 million hours,
calculated per Telcordia TR-332, Method I Case 1
• High efficiency – no heat sink required
• Higher current capability at 70 ºC than most
competitors’ 40 A half-bricks
• UL60950 recognized in US and Canada and
DEMKO certified per IEC/EN60950 (pending)
• Designed to meet Class B conducted emissions per
FCC and EN55022 when used with external filter
• All materials meet UL94, V-0 flammability rating
Description
The QME48T40 DC-DC Series of converters provide outstanding thermal performance in high temperature
environments. This performance is accomplished through the use of patented/patent-pending circuits, packaging,
and processing techniques to achieve ultra-high efficiency, excellent thermal management, and a low-body profile.
The low-body profile and the preclusion of heat sinks minimize impedance to system airflow, thus enhancing
cooling for both upstream and downstream devices. The use of 100% automation for assembly, coupled with
advanced electronic circuits and thermal design, results in a product with extremely high reliability.
Operating from a 36-75 V input, the QME48T40 converters provide any standard output voltage from 3.3 V down
to 1.0 V that can be trimmed from –20% to +10% of the nominal output voltage (±10% for output voltages 1.2 V
and 1.0 V), thus providing outstanding design flexibility.
ZD-02057 Rev. 4.1
www.power-one.com
Page 1 of 35