QC841
Hybrid Integrated IGBT Driver
QC841 is a hybrid integrated IGBT driver built-in electrical
isolation between power devices and control circuits with the high
CMRR opto-coupler. Short circuit protection is provided by a
built-in desaturation detector. A fault signal is provided if the short
circuit protection is activate
FEATURES
ABSOLUTE MAXIMUM RATINGS
Item
Test Conditions
Limit
25
Units
V
● Built in high CMRR opto-coupler
(CMR:Typical:30kV/µs, Min.:15kV/µs)
● Electrical isolation voltage between input and
output with opto-couplers
Supply Voltage*
Input Voltage
VCC DC
VI
Between Pin14 and Pin15
-1~+7
25
V
Photo coupler input current
Iin
Between Pin14 and Pin15
mA
A
(Viso=3750VRMS/min)
Ig on
Ig off
+5
Pulse width 2µs
Frequency f=20kHz
● Switching frequency up to 20kHz
● Single supply drive topology
● Built in short circuit protection circuit with a
pin for fault output
Output current
-5
A
Isolation Voltage
Viso Sinewave voltage 50Hz/60Hz 1 min.
3750
-20~+70
-40~+125
20
V
Operation Temperature
Storage Temperature
Fault Output Current
Input Voltage
Topr
°C
°C
mA
V
● Soft IGBT turn-off and protection circuit time
reset
Tstg
IFO
● Pins are compatible with EXB841
VR1 Pin6 input voltage
50
Note:Ta=25°C; unless otherwise specified.
ELECTRICAL CHARACTERISTIC
Value
Characteristics
Test Conditions
Units
APPLICATION
Min
18
Typ.
20
5
Max
22
l General-purpose Inverter
l AC Servo Systems
Supply Voltage
VCC Recommended Range
V
V
Pull-up voltage on input side VIN Recommended Range
4.75
5.25
l Uninterruptable Power Supplies(UPS)
l Welding Machines
Reverse bias power supply
VRB Recommended Range
voltage
-5
V
“H” input current
Switching frequency
Gate resistor
IIH
ƒ
Recommended Range
Recommended Range
Recommended Range
VIN=5V
15.2
16
19
20
mA
kHz
Ω
RG
IIH
2
-
“H” input current
“H” output voltage
“L” output voltage
“L-H” propagation
“L-H” rise time
16
14
-5
-
-
mA
V
RECOMMENDED MODULES
VOH VCC=20V
VOL VCC=20V
tPLH IIH=16mA
13
-
l 600V Series IGBT(up to 600A)
l 1200V Series IGBT(up to 400A)
l 1700V Series IGBT(up to 200A)
-
V
-
0.5
0.6
1
1
µs
µs
µs
µs
V
tr
tPHL IIH=16mA
tf IIH=16mA
IIH=16mA
1
“H-L” propagation
“H-L” fall time
1.3
1
0.4
8.5
1.4
Protection threshold voltage VOCP VCC=20V
Protection reset time
Fault output current
Soft turn-off time
ttimer
IFO
1
2
5
ms
mA
µs
MORNSUN Science & Technology co.,Ltd.
Pin5 input current, R=4.7K
Address: 2th floor 6th building, Huangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
Toff2 Pin6: ≥15V, Pin11:open
Ttrip1 Pin6: ≥15V, Pin11:open
5
Controlled time detect
short circuit 1
2.6
µs
Note: 1. Ta=25°C, VCC=15V. unless otherwise specified
2. ”H” represents high level; “L” represents low level.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
QC841 A/1-2008 Page 1 of 2