QC962
Hybrid Integrated IGBT Driver
QC962 is a hybrid integrated IGBT driver designed for
driving N-channel IGBT modules in any gate amplifier
application. The device provides the required electrical
isolation between input and output with the opto-coupler.
Short circuit protection is provided by a built-in desaturation
detector. A fault signal is provided if the short circuit
protection is activate.
FEATURES
ABSOLUTE MAXIMUM RATINGS
Item
Test Conditions
Limit
18
Units
V
● Built in high CMRR opto-coupler
(CMR:Typical: 30kV/µs, Min.:15kV/µs)
● Two supply drive topology
VCC
VEE
VI
Supply Voltage*
DC
-15
V
Between pin13 and pin14
● TTL compatible input interface
● Electrical isolation voltage between input
and output with opto-couplers
(Viso=3750VRMS/min)
Input Voltage
-1~+7
VCC
V
Output Voltage
VO Output voltage “H”
V
Ig on
Ig off
Viso
TJ
+5
A
Pulse width 2µs
Frequency f=20kHz
Output Current
-5
A
● Built in short circuit protection circuit with a
pin for fault output
Isolation Voltage
3750
150
V
Sine wave voltage 50Hz/60Hz,1 min.
Junction Temperature
Operation Temperature
Storage Temperature
Fault Output Current
Input Voltage
°C
°C
°C
mA
V
● Soft IGBT turn-off and protection circuit time
reset
Top
Tst
-20~+70
-40~+125
20
● Controlled time detected short circuit
● Switching frequency up to 20kHz
● Pin and characteristic are compatible with
M57962AL
IFO
VR1 Pin 1 voltage
50
Notes: 1. Ta=25°C unless otherwise specified.
2. *20V<VCC-VEE<28V.
ELECTRICAL CHARACTERISTIC
Value
Typ. Max
Characteristics
Test Conditions
Units
Min
14
APPLICATION
VCC
VEE
15
-
-
V
V
Supply Voltage
Recommended Range
● General-purpose Inverter
● AC Servo Systems
-7
-10
5.25
19
Pull-up voltage on input side VIN
Recommended Range
Recommended Range
Recommended Range
Recommended Range
VIN=5V
4.75
15.2
5
V
● Uninterruptable Power Supplies(UPS)
● Welding Machines
“H” input current
Switching frequency
Gate resistant
IIH
f
16
mA
kHz
Ω
20
RG
IIH
2
-
“H” input current
“H” output voltage
“L” output voltage
“L-H” propagation
“L-H” rise time
16
14
-
-
-
mA
V
VOH
VOL
13
-6
-
-9
1
V
RECOMMENDED MODULES
tPLH IIH=16mA
tr IIH=16mA
tPHL IIH=16mA
tf IIH=16mA
0.5
0.6
1
µs
µs
µs
µs
V
● 600V Series IGBT(up to 600A)
● 1200V Series IGBT(up to 400A)
● 1700V Series IGBT(up to 200A)
1
“H-L” propagation
“H-L” fall time
1.3
1
0.4
8.4
1.3
5
Protection threshold voltage VOCP Vcc=15V,VEE=-10V
Protection reset time
Fault output current
ttimer
IFO
1
2
ms
mA
Pin8 input current, R=4.7K
MORNSUN Science & Technology co.,Ltd.
Controlled time detect
short circuit 1
Address: 2th floor 6th building, Huangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
Ttrip1 Pin1: ≥15V,Pin2:open
2.6
µs
µs
Controlled time detect
short circuit 2
Pin1:≥15V
Ttrip2
3
5
Pin2- Pin4:1000pF
Soft turn-off time
SC detect voltage
Toff2 PIN1:≥15V,PIN2:open
µs
VSC Collector voltage of module 15
V
Notes: 1. Ta=25°C, VCC=15V, VEE=-10V. unless otherwise specified
2.”H”represents high level; “L” represents low level.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
QC962 A/1-2008 Page 1 of 2