5秒后页面跳转
PVH-16V390MF60E-R2 PDF预览

PVH-16V390MF60E-R2

更新时间: 2024-11-24 22:58:15
品牌 Logo 应用领域
其他 - ETC /
页数 文件大小 规格书
2页 148K
描述
CAP ALUM POLY 39UF 20% 16V SMD

PVH-16V390MF60E-R2 数据手册

 浏览型号PVH-16V390MF60E-R2的Datasheet PDF文件第2页 
ALUMINUM ELECTROLYTIC CAPACITORS  
®
PVH WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE  
$QWLꢁ  
FOHDQLQJ  
VROYHQW  
*5((1  
&$3  
/RZ  
(65  
ꢂꢃꢄÝ&  
ꢅꢃꢃꢃKRXUV  
60'  
&KLSꢀ7\SH  
Super low E.S.R. and high ripple current are realized.  
Guaranteed 105℃, 2000 hours.  
PVH  
Specifications  
Item  
Performance  
Category temperature range (℃)  
-55 to +105  
±20  
Tolerance at rated capacitance (%)  
(20℃,120Hz)  
Rated voltage (V)  
Leakage current (µA)  
2.5 to 20  
Less than 0.2 CV  
25,35  
Less than 0.5 CV  
Leakage current (µA)  
*Note  
C : Rated capacitance (µF) ; V : Rated voltage (V)  
(20℃)  
Tangent of loss angle (tanδ)  
Less than 0.12  
(20℃,120Hz)  
Impedance ratio (max.)  
Characteristics at high  
and low temperature  
Z-55/20℃ : 1.50  
(100kHz)  
Test time  
Leakage current  
Percentage of capacitance change  
Tangent of the loss angle  
E.S.R. change  
2000 hours  
The initial specified value or less  
Within 20% of initial value  
150% or less of the initial specified value  
200% or less of the initial specified value  
Endurance (105℃)  
(Applied ripple current)  
±
Test time  
Leakage current  
Percentage of capacitance change  
Tangent of the loss angle  
E.S.R. change  
500 hours  
The initial specified value or less  
Within ±20% of initial value  
150% or less of the initial specified value  
200% or less of the initial specified value  
Damp heat, steady state  
(humidity)  
60℃, 90 to 95%RH  
The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 15 to 35℃ for 30 seconds  
through a protective resister (Rc=1kΩ) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage  
Characteristics of applied  
surge voltage  
Leakage current  
Percentage of capacitance change  
Tangent of the loss angle  
E.S.R. change  
The initial specified value or less  
Within 20% of initial value  
150% or less of the initial specified value  
200% or less of the initial specified value  
±
Failure tare  
0.5% per 1000 hours maximum (Confidence level 60% at 105℃)  
Note : If any doubt arises, measure the leakage current after following voltage application treatment.  
*
Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105℃.  
Outline Drawing  
Unit : mm  
Part numbering system (example : 4V150µF)  
0.3MAX  
A±0.2  
PVH  
̶
4
V
151  
M
F60 E ̶  
Rated voltage  
symbol  
Rated capacitance  
symbol  
Capacitance  
tolerance symbol  
Casing  
symbol  
Taping  
symbol  
Series code  
W
L±0.3  
(
) : Reference size  
φD  
6.3  
8
L
A
B
C
W
P
Casing symbol  
F60  
5.7  
6.7  
7.7  
6.6  
8.4  
10.4  
6.6  
8.4  
10.4  
2.7  
3.0  
3.2  
0.5 to 0.8  
0.5 to 0.8  
0.7 to 1.1  
2.0  
3.1  
4.7  
G70  
H80  
10  
Soldering conditions are described on page 13.  
Land pattern size are described on page 11.  
The taping specifications are described on page 14.  
NOTE  
Design, Specifications are subject to change without notice.  
34  
CAT.No.2013/2014E  
Ask factory for technical specifications before purchase and/or use.  

与PVH-16V390MF60E-R2相关器件

型号 品牌 获取价格 描述 数据表
PVH-16V820MG70E-R2 ETC

获取价格

CAP ALUM POLY 82UF 20% 16V SMD
PVH2 RCD

获取价格

Wirewound, Film, Vertical Mount 2W - 10W
PVH-20V220MF60E-R2 ETC

获取价格

CAP ALUM POLY 22UF 20% 20V SMD
PVH-20V390MG70E-R2 ETC

获取价格

CAP ALUM POLY 39UF 20% 20V SMD
PVH-20V470MG70E-R2 ETC

获取价格

CAP ALUM POLY 47UF 20% 20V SMD
PVH-20V820MH80E-R2 ETC

获取价格

CAP ALUM POLY 82UF 20% 20V SMD
PVH-25V100MF60E-R2 ETC

获取价格

CAP ALUM POLY 10UF 20% 25V SMD
PVH-25V220MG70E-R2 ETC

获取价格

CAP ALUM POLY 22UF 20% 25V SMD
PVH-25V390MH80E-R2 ETC

获取价格

CAP ALUM POLY 39UF 20% 25V SMD
PVH3 RCD

获取价格

Wirewound, Film, Vertical Mount 2W - 10W