TPS25772-Q1
SLVSG14T–PJASN2U5A7R7Y22-Q0211
SLVSG14 – JANUARY 2021
www.ti.com
TPS25772-Q1 Automotive Dual USB Type-C Power Delivery Controller with Buck-
Boost Regulator
1 Features
3 Description
•
AEC-Q100 qualified with the following results:
– Device temperature grade 1: –40°C to +125°C
ambient operating temperature range
The TPS257xx-Q1 is dual USB Type-C® PD and
BC1.2 charging port controller for use in automotive
dual USB port applications that include charge only
and charging with USB 2.0 or 3.0 data. Functionality
includes: an ARM Cortex M0™; USB port controller
with Type-C cable plug and orientation detection; USB
Battery Charging Specification Version 1.2 (BC1.2)
detection; USB Endpoint PHY; device power
management and supervisory circuitry; connector pin
protection over-voltage and short-circuit protection;
and integrated buck-boost converter.
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C5
– Enhanced connector pin ESD protection
USB Power Delivery (PD) controller with
Programmable Power Supply (PPS) support
– Wide VIN: 5.5 V to 18 V (40-V maximum)
– Integrated buck-boost sources up to 60-W USB
PD output power
•
Full 60-W output power is achievable over 6.8 V ≤ VIN
≤ 18 V at up to 70°C ambient temperature (TA). An
intelligent System Policy Manager maximizes
delivered USB power while protecting the system from
automotive battery transient and over-temperature
conditions.
– VBUS output: 3 - 21 V with ± 20-mV step size
– IBUS output: ± 50-mA current limit step size
•
•
Up to 5 A, 3 V ≤ VBUS ≤ 11 V
Up to 3 A, 11 V ≤ VBUS ≤ 21 V
– VBUS short circuit to VBAT and GND protection
– Switching frequency: 300, 400, 450 kHz
– Sync In / Out with dithering
Device configuration settings are selected through an
intuitive graphical user interface (GUI).
•
•
USB port configurations options
Device Information
– 2 USB-PD Ports (TPS25772-Q1)
– 1 USB-PD and 1 USB-C Ports (TPS25766-Q1)
– 1 USB-PD and 1 Type-A Ports (TPS25764-Q1)
Compliant to USB
PART NUMBER
TPS25764-Q1(2)
TPS25766-Q1(2)
TPS25772-Q1
PACKAGE(1)
BODY SIZE
RQL (QFN-29)
6 mm x 5 mm
– Type-C power delivery rev 3.0
•
•
CC logic, VCONN source and discharge
USB cable polarity detection
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) PRODUCT PREVIEW status.
– Battery charging specification rev 1.2
DCP: Dedicated Charging Port
•
VBAT
PGND
IN
– 2.7-V divider-3 mode
– 1.2-V divider mode
Short to VBUS and VBAT protection
– Px_ DP and Px_DM
ON
PA_CC1
PA_CC2
PA_DP
OFF
EN
LDO5V
•
PA_DM
CSN/BUS
CSP
LDO3V3
LDO1V5
3-21V
– Px_CC1 and Px_CC2
OUT
AGND
TVSP
3V3
2 Applications
PB_BUS
NTC
/INT
•
•
•
•
Automotive USB Power Delivery Chargers
Automotive USB Hubs/Media Ports
Automotive USB Rear Seat Entertainment
Automotive USB Head Unit
E2PROM
(32kB)
SCL1
SDA1
PB_CC1
PB_CC2
PB_DP
PB_DM
VBAT
3-21V
TPS55288-Q1
(I2C buck-boost)
Port B VBUS
TPS25772-Q1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for preproduction products; subject to change
Product Folder Links: TPS25772-Q1
1
without notice.