Features
■ Carbon element
■ Red, orange, green, amber and white LED colors
■ Center detent option
■ Assortment of resistance tapers
■ Various travel lengths
■ Various lever sizes
PTL Series Slide Potentiometer w/LED
Product Dimensions
Electrical Characteristics
Standard Resistance Range
20 mm Length of Travel
Lever
Length
........................1K ohms to 1 megohm
Standard Resistance Tolerance....±20 %
End Resistance
35.0 ± 0.5
(1.378 ± .020)
9.0 ± 0.5
(.354 ± .020)
10.0
(.394)
31.0 ± 0.2
(1.220 ± .008)
20 mm Travel ............... 10 ohms max.
30 mm Travel ............... 20 ohms max.
45 mm Travel ............... 20 ohms max.
60 mm Travel ............... 30 ohms max.
100 mm Travel ............. 30 ohms max.
Insulation Resistance @ 250 VDC
............................. 100 megohms min.
Dielectric Withstanding Voltage
..............................................300 VAC
Standard Taper..................Linear, Audio
Power Rating - Linear
20 mm Travel ....................... 0.05 watt
30 mm Travel ......................... 0.1 watt
45 mm Travel ..................... 0.125 watt
60 mm Travel ......................... 0.2 watt
100 mm Travel ....................... 0.2 watt
Power Rating - Audio
2.8
(.110)
27.0
(1.063)
15.0
(.591)
1
19.0
(.748)
0.4
(.016)
M2 X
2 PLCS.
20.0 ± 0.5
3.0
(.118)
MM
(INCHES)
(0.787 ± .020)
DIMENSIONS:
5.5
(.217)
5.5 ± 0.1
6.0 ± 0.1
(.236 ± .004)
(.217 ± .004)
2.05 ± 0.1
(.081 ± .004)
6.6
(.260)
1.0 ± 0.1
(.039 ± .004)
LED
L ± 0.5
0.5
(.020)
(L ± .020)
MOUNTING
SURFACE
20 mm Travel ..................... 0.025 watt
30 mm Travel ....................... 0.05 watt
45 mm Travel ....................... 0.06 watt
60 mm Travel ......................... 0.1 watt
100 mm Travel ....................... 0.1 watt
Slider Noise.......................200 mV max.
7.0 ± 0.5
(.276 ± .020)
0.4
(.016)
0.6
(.024)
3.5 ± 0.5
(.138 ± .020)
Environmental Characteristics
Mounting Hole Detail
Operational Life................15,000 cycles
TR Shift .....................................±15 %
Operating Temperature Range
..................................-10 °C to +55 °C
Resistance to Solder Heat..............±5 %
Moisture Sensitivity Level.....................1
ESD Classification (HBM)................. N/A
7.5 ± 0.1
(.295 ± .004)
2.5 ± 0.1
(.098 ± .004)
30.0 ± 0.1
(1.181 ± .004)
2
1
L
E
3
HOLES
1.1 +0.2/-0
B
(.043 +.008/-0)
DIA. 6 PLCS.
Mechanical Characteristics
Mechanical Travel.........Length ±0.5 mm
Operating Force...............30 gf to 250 gf
Center Detent Force........20 gf to 200 gf
Stop Strength.......................... 5 kgf min.
Shaft Axial Force .................... 5 kgf min.
Shaft Wobble...2(2 x L/20) mm p-p max.
Soldering Condition
Manual ...........300 °C ±5 °C for 3 sec.
Wave..............260 °C ±5 °C for 5 sec.
Wash..................... Not recommended
Standard Resistance Table
Schematic
Resistance
(Ohms)
1,000
Resistance
2
Code
102
202
502
103
203
503
104
204
504
105
1
3
R1
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.