500W with PFC and Parallel Function
PSP-500 series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Foced air cooling by built-in DC fan
Current sharing up to 2000W(3+1)
With power good and fail signal output
Built-in remote ON-OFF control
Built-in remote sense function
3 years warranty
SPECIFICATION
MODEL
PSP-500-5
PSP-500-12
PSP-500-13.5
PSP-500-15
PSP-500-24
PSP-500-27
PSP-500-48
DC VOLTAGE
5V
12V
13.5V
15V
24V
27V
48V
RATED CURRENT
CURRENT RANGE
RATED POWER
80A
41.5A
37A
33A
20.8A
18.5A
10.5A
0 ~ 80A
400W
0 ~ 41.5A
498W
0 ~ 37A
499.5W
150mVp-p
12 ~ 15V
1.0%
0 ~ 33A
495W
0 ~ 20.8A
499.2W
150mVp-p
20 ~ 26.4V
1.0%
0 ~ 18.5A
499.5W
150mVp-p
24 ~ 30V
1.0%
0 ~ 10.5A
504W
RIPPLE & NOISE (max.) Note.2 100mVp-p
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3 2.0%
150mVp-p
10 ~ 13.2V
1.0%
150mVp-p
13.5 ~ 18V
1.0%
200mVp-p
41 ~ 56V
1.0%
OUTPUT
4.75 ~ 5.5V
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
0.5%
2.0%
0.3%
0.3%
0.3%
0.2%
0.2%
0.2%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1500ms, 50ms at full load
24ms at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.6 90 ~ 264VAC
127 ~ 370VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
47 ~ 63Hz
0.95/230VAC
76%
0.98/100VAC at full load
INPUT
82%
82%
82%
84%
84%
86%
7A/115AVC
20A/115VAC
<1mA / 240VAC
3.5A/230VAC
40A/230VAC
LEAKAGE CURRENT
110 ~ 125% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V
Protection type : Shut down o/p voltage, re-power on to recover
OVERLOAD
57.6 ~ 67.2V
PROTECTION OVER VOLTAGE
RTH2 95 detect on heatsink of Q1,Q7 power transistor & L3 output choke
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH with 30CFM forced air non-condensing
sink current <4 ~ 10mA
FUNCTION REMOTE CONTROL
WORKING TEMP.
WORKING HUMIDITY
-20 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50
STORAGE TEMP., HUMIDITY
ENVIRONMENT
TEMP. COEFFICIENT
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
SAFETY &
EMC
(Note 4)
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
130.1K hrs min. MIL-HDBK-217F (25
)
OTHERS
NOTE
DIMENSION
PACKING
278*127*63.5mm (L*W*H)
2.6Kg; 6pcs/15.7Kg/0.89CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. In parallel connection, maybe only one unit operated, if the total output load less than 5% of rated load condition.
6. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:PSP-500-SPEC 2008-12-30