PSIUU61 SERIES
Rev A
Wall Industries, Inc.
Up to 63 Watts, AC/DC Switching Power Supplies
FEATURES
• Class I
• Wide Input Voltage Range: 81~280VAC (90~420VDC)
• Single to Quad Outputs
• RoHS Compliant
• Internal EMI Filter
• -20°C to +70°C Operating Temperature Range
• 2-Pin Screw Terminal Input Connector
• 3-Pin Screw Terminal Input Connector Available (See PSIUU60 Series)
• UL/cUL(UL 60950-1: 2nd Edition) & TUV/GS (EN 60950-1: 2nd Edition)
Safety Approvals
• Up to 63 Watts Output Power
• Power Fail Detect (Optional)
• Over Voltage and Over Current Protection
• 100% Burn-in Tested
DESCRIPTION
The PSIUU61 series of Class I AC/DC switching mode power supplies provides up to 63 Watts of continuous output
power in a 5.00” x 3.21” x 1.38” U-chassis package. This series has single, dual, triple, and quad output models with a
wide input voltage range of 81~280VAC (90~420VDC). These power supplies have an internal EMI filter and are
protected against over voltage and over current conditions. This series also has UL/cUL (UL 60950-1: 2nd edition) and
TUV/GS (EN 60950-1: 2nd edition) safety approvals. These units are well suited for use in industrial equipment as well as
many other applications. All models are 100% burn-in tested.
Size:
5.00 x 3.21 x 1.38 inches
127.0 x 81.6 x 35.1 mm
Weight:
15oz (425g)
TECHNICAL SPECIFICATIONS: PSIUU61 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ
Max
Unit
90
106
81
264
250
280
420
63
VAC
VDC
VAC
VDC
Hz
Universal Input Voltage Range
Operating Input Voltage Range
Input Voltage
90
47
Input Frequency
Input Current
Vin = 100VAC or 160VDC, Io = full load
1.6
0.8
A
Vin = 240VAC or 325VDC, Io = full load
Vin = 115VAC or 160VDC, Io = full load, 25°C, cold start
Vin = 230VAC or 325VDC, Io = full load, 25°C, cold start
Vin = 230VAC, Io = no load
35
70
2
Inrush Current
A
No Load Power Consumption
OUTPUT SPECIFICATIONS
Output Voltage
W
See Table
Line Regulation
LL to HL, full load
0.5
5
1
6
%
%
Load Regulation
Vin = 230VAC or 325VDC
Output Power
Output Current
See Table
See Table
Outputs under 3.3VDC
Others
2
1
Ripple & Noise (peak to peak)
Vin = 85VAC or 100VDC, Io = full load
%
Hold-up Time
Start-up Time
Vin = 110VAC or 160VDC, Io = full load
Vin = 100VAC or 140VDC, Io = full load
Vin = 100VAC or 140VDC, Io = Full load to half load
0~50°C
16
ms
s
2
5
Transient Response Time
Temperature Coefficient
PROTECTION
ms
%/°C
-0.05
+0.05
Over Voltage Protection
Over Current Protection
GENERAL SPECIFICATIONS
Efficiency
112
110
132
150
%
%
Vin = 230VAC or 325VDC, Io = full load
Primary to Secondary
Primary to PE
70
4242
2414
50
88
%
Dielectric Withstanding Voltage
VDC
Isolation Resistance
Leakage Current
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Cooling
Test Voltage = 500VDC
Vin = 240VAC/60Hz
MΩ
mA
0.45
Derating linearly from 100% Load at 50°C to 50% load at 70°C
-20
-40
0
+70
+85
°C
°C
%
%
95
95
0
Free air convection
MTBF
PHYSICAL SPECIFICATIONS
Weight
MIL-HDBK-217F, 25°C
100,000
hours
15oz (425g)
Dimensions (L x W x H)
Input Connector
Output Connector
SAFETY
5.00 x 3.21 x 1.38 inches (127.0 x 81.6 x 35.1 mm)
Mates with screw terminal DINKLE#ESK750V-02P (10-24AWG)
Mates with screw terminal DINKLE#ESK750V-05P (10-24AWG)
Safety Approvals
UL/cUL (UL 60950-1: 2nd edition); TUV/GS (EN 60950-1: 2nd edition)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
01/14/2014
Page 1 of 4