PSAQC60 Series
For PCB Mount
60 Watt Single Output
AC/DC Switching Power Supply
FEATURES
● Trimmable Output of ±10%
● Single Output of 5VDC to 24VDC
● Switching Power Module for PCB Mount
● Universal Input of 90-264VAC for Worldwide Use
● Short Circuit, Over Power, and Over Voltage Protection
SPECIFICATIONS: PSAQC60 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
90 ~ 264VAC or 120 ~ 370VDC
47 to 63Hz
Input Current (Full Load)
Inrush Current (<2ms)
Leakage Current
2A max @ 115VAC / 1A max @ 230VAC
20A max @ 115VAC / 40A max @230VAC
3.5mA max
OUTPUT SPECIFICATIONS
Output Voltage
Output Power Range
Voltage Accuracy
Trim
See Table
60 Watts max.
±2%
±10%
±1% typical
±1% typical
See Table
0%
Line Regulation (LL – HL)
Load Regulation (5% to 100%)
Output Current
Minimum Load
Ripple & Noise
Maximum Capacitive Load
Hold-Up Time
75mVp-p max.
470 - 23,000µF depending on model
18ms min.
Temperature Coefficient
PROTECTION
±0.02%/°C
Over Power Protection
Over Voltage Protection
Short Circuit Protection
GENERAL SPECIFICATIONS
Switching Frequency
Efficiency
Auto recovery
Zener diode clamp
Auto recovery
133KHz
See Table
3000VAC
Isolation Voltage (Input to Output)
Isolation Voltage (Input to Field Ground)
Isolation Voltage (Output to Field Ground)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Humidity
1500VAC
500VAC
-25°C to +70°C (with derating)
-40°C to +85°C
95% RH
Free air convection
> 130,000 hours @ 25°C (MIL-HDBK-217F)
Cooling
MTBF
PHYSICAL SPECIFICATIONS
Weight
420g
Dimensions
4.25(L) x 2.24(W) x 1.34(H) inches (108.0(L) x 57.0(W) x 34.0(H) mm) (Tolerance ±0.5mm)
SAFETY & EMC
Agency Approvals
CE, UL
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
EN 55022 class B
EN 55024
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797