PSAPC Series
5 Watt
Single and Dual Outputs
Encapsulated AC/DC Power Supply
FEATURES
● High Efficiency
● 2 Year Warranty
● Regulated Output
● Low Ripple and Noise
● CE, UL, TUV Approval
● Fully Encapsulated Plastic Case
● Switching Power Module for PCB Mounting
● Universal Input Range 90-264VAC, 47-440 Hz
SPECIFICATIONS: PSAPC Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
90 ~ 264VAC or 120 ~ 370VDC
47 to 440Hz
110mA max @ 115VAC / 70mA max @ 230VAC
10A max @ 115VAC / 20A max @230VAC
0.75mA max
Input Current
Inrush Current (<2ms)
Leakage Current
OUTPUT SPECIFICATIONS
Output Voltage
Output Power Range
Voltage Accuracy
See Table
5 Watts max.
±2%
Line Regulation (LL – HL)
Load Regulation (5% to 100%)
Output Current
±0.3% typical
±0.5% typical
See Table
See Table
Minimum Load
Ripple
< 0.2% Vout +40mV max (Vp-p)
< 0.5% Vout +50mV max (Vp-p)
470 - 23,000µF depending on model
15ms min.
Noise
Maximum Capacitive Load
Hold-Up Time
Temperature Coefficient
PROTECTION
±0.02%/°C
Over Power Protection
Over Voltage Protection
Short Circuit Protection
Input Fuse Recommendation
GENERAL SPECIFICATIONS
Switching Frequency
Efficiency
Hiccup technique, auto-recovery
Zener diode clamp
Hiccup mode, indefinite (automatic recovery)
1.5A slow blow type
100KHz
See Table
3000VAC
Isolation Voltage (Input to Output)
Isolation Voltage (Input to Field Ground)
Isolation Voltage (Output to Field Ground)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Humidity
1500VAC
500VAC
-25°C to +70°C (with derating)
-40°C to +85°C
95% RH
Free air convection
Cooling
MTBF
> 300,000 hours @ 25°C (MIL-HDBK-217F)
PHYSICAL SPECIFICATIONS
Weight
Case Material
Dimensions
SAFETY & EMC
Agency Approvals
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
80g
Plastic resin with fiberglass (flammability to UL 94V-0)
2.17(L) x 1.77(W) x 0.81(H) inches (55.0(L) x 45.0(W) x 20.5(H) mm)
UL/cUL, CE, TUV
EN 55022 class B
EN 50082-1
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797