Gas DischargeTube (GDT) Products
SL1021A/B, SL1024A/B and PMT8 Series
®
SL1021A/B, SL1024A/B and PMT8 Series
Description
GDT circuit protection devices dissipate electrical
surge energy safely within a contained plasma gas.
Commonly used to help protect sensitive telecom and
networking equipment and lines, GDTs protect from
damage that may result from lightning strikes and
equipment switching operations.
The Littelfuse GDT series described in this document
are available in a variety of leaded and surface mount
forms and offered with and without optional fail-
safe clip. Please refer to the electrical specifications,
dimension and packaging options section of this
document for additional information.
Agency Approvals
SL1021A/B and SL1024A/B Series:
SL1021A/B and SL1024A/B series GDTs are designed
to offer high levels of performance on fast rising
transients in the range of 100V/μS to 1KV/μS, which
are those most likely created by induced lightning
disturbances.
AGENCY
AGENCY FILE NUMBER
E128662
®
These devices feature ultra low capacitance (typically
1.5pF or less) and are extremely robust with SL102xA
devices able to divert a 10,000 Amp pulse without
destruction, and SL102xB suffix devices able to divert
a 20,000 Amp pulse without destruction.
3 Electrode GDT Graphical Symbol
a
b
a =TIP
b = RING
e = GROUND
(center electrode)
These series offer optimized internal geometry which
provide low insertion loss at high frequencies, ideal
for the protection of broadband and other high speed
transmission equipment.
e
PMT8 Series:
Features
PMT8 GDT's are telecom grade devices designed to
meet the recommendations in CCITT-K12 and Bellcore
GR-1361-CORE. The three electrode configuration
is used in applications where simultaneous crowbar
action of two signal lines is required.
• RoHS compliant
• 10KA (A suffix devices) /
20KA (B suffix devices)
surge capability tested
with 8/20μs pulse as
• Low insertion loss
• Excellent response to
fast rising transients
defined by IEC 61000-4-5
• Ultra low capacitance
• Available with thermal
failsafe option (add ‘F’
suffix to part number)
Product Characteristics
DullTin Plate 17.5 12.5 Microns.
with ceramic insulator
Materials
Applications
‘LF’ mark, voltage& date code:
Product Marking
SL102xA - Red/White text
SL1021 / SL1024:
PMT8:
SL102xB & PMT8 - Blue/White text
• Broadband equipment
• ADSL equipment
• XDSL equipment
• Telecom network
interfaces
Glow to arc
~ 1Amp
transition current
• Telephone line cards
• Repeaters
GlowVoltage
~60-200 Volts
-40 to +90°C
• Satellite and CATV
equipment
Storage and Operation
Temperature
• Modems
TransverseVoltage
(DelayTime)
• Splitters
• Line test equipment
< 0.2ꢀSec (Tested to ITU-T Rec. K.12)
• General telecom
equipment
ArcVoltage
~10 to 35 Volts
HoldoverVoltage
<150mS (Tested to ITU-T Rec. K.12)
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
18
Revised: June 28, 2010
SL1021A/B, SL1024A/B and PMT8 Series
Customer should verify actual device performance in their specific applications.